[SCR] CODEA Weapon System [09-06-03 X3TC 3.beta.19]

Saetan · Post by **Saetan** » Mon, 27. Apr 09, 17:23

kelmen:
With this equipment (as far as I know, all of them ... only one or two of them don't matter) on your fighters, CODEA will not recognize them to add them. Thats because these equipment marks a fighter as a player-ship. If the fighters are already added, CODEA doesn't care anymore about these equipment.

spacefulladdict:
I just downloaded CODEA and the library and I've been able to open them with 7-Zip.

aka1nas · Post by **aka1nas** » Mon, 27. Apr 09, 17:59

Lucike wrote:Docking Computer is installed?

Yep, I've rechecked the equipment 20 times now and made sure I don't have any of the three forbidden extensions on that ship. When I transfer a Lt. pilot to the cockpit, I've also noticed that there rank never shows up, I just get "Niklas Gisler (Your Marlin Hauler)" in the personnel overview. I've tried it with several pilots, including commanders, but nothing seems to work.

Lucike · Post by **Lucike** » Mon, 27. Apr 09, 19:07

Step by step.

- A ship of class M8 (Marlin Hauler is an Argon M8 ship, right?)
- set homebase to carrier
- Pilot of the rank Lieutenant
- Fight Command Software MK1
- Fight Command Software MK2
- Docking Computer
- Cargo Life support System
- Navigation Command Software MK1
- Technician
- Mechanic

The ship is in follow mode and in the same sector?

aka1nas · Post by **aka1nas** » Mon, 27. Apr 09, 21:40

Lucike wrote:Step by step.

- A ship of class M8 (Marlin Hauler is an Argon M8 ship, right?)
- set homebase to carrier
- Pilot of the rank Lieutenant
- Fight Command Software MK1
- Fight Command Software MK2
- Docking Computer
- Cargo Life support System
- Navigation Command Software MK1
- Technician
- Mechanic

The ship is in follow mode and in the same sector?

I think it's the boron M8 (Actually, it's probably a pirate variant that I capped). I have all the above requirements met. Could it matter if the carrier is not an M1? I'm using an M7 panther.

darkfear · Post by **darkfear** » Mon, 27. Apr 09, 22:27

aka1nas wrote: I think it's the boron M8 (Actually, it's probably a pirate variant that I capped). I have all the above requirements met. Could it matter if the carrier is not an M1? I'm using an M7 panther.

It's definitely not the panther. I'm using a panther with 4 M8 split bombers.

Just remembered, make sure you have free docking ports on your panther.

jlehtone · Post by **jlehtone** » Mon, 27. Apr 09, 22:37

How about submitting and entry into the [url=http://forum.egosoft.com/viewtopic.php?t=216690]TC Download Library[/url]?

aka1nas · Post by **aka1nas** » Mon, 27. Apr 09, 23:22

darkfear wrote:
aka1nas wrote: I think it's the boron M8 (Actually, it's probably a pirate variant that I capped). I have all the above requirements met. Could it matter if the carrier is not an M1? I'm using an M7 panther.
It's definitely not the panther. I'm using a panther with 4 M8 split bombers.

Just remembered, make sure you have free docking ports on your panther.

Do corvettes and tenders take up a docking "spot" even if they can't actually dock in the ship? I should have had a spot or two free for the M8, but I will try removing a few ships to make sure. Anything else I can try?

aka1nas · Post by **aka1nas** » Tue, 28. Apr 09, 10:56

Ok, I figured out what's wrong from the screenshots in the first post. My mechanics and technics are not showing up as part of the carrier's personnel. I ,um ,"liberated" this batch by taking over one the Military transports with the Cheat Scripts and transferring the personnel to my Panther. Out the airlock with the lot of them!

I guess I'll have to do this the right way. If I want to use the method where you get the carrier to the outpost right before the transport, do I need to be piloting the carrier?

Also, I've tried using the method where I leave one of the CODEA carrier's ships at a Military Outpost (with a Lt. pilot installed , a CLS, and plenty of cargo space), but they never seem to recruit any personnel. How long should this normally take?

Stealth17 · Post by **Stealth17** » Tue, 28. Apr 09, 16:54

I have a question regarding the missile use of the attackfighters:

I have a flight of Eclipses armed with Thunderbolts. Each time they land they reset the missile fire probability to 0% but they do fire the missiles! What is the rule for this? They automatically check whether the target is worthy of the missile?
And if the ship is armed with different sorts of missiles, will the fighter pick the best missile for the job?
If I would attack a capital ship with my Eclipses armed with Thunderbolts and Wasps, would they first fire Wasps to distract the turrets and then the Thunderbolts?

Great script Lucike, really loving it

DJSfinx · Post by **DJSfinx** » Tue, 28. Apr 09, 17:58

I've been watching this and can no longer resist the urge to try it out, now that I'm starting to assemble somewhat of a decent carrier fleet and feeling the need for more control.

Just to be sure I don't mess up my entire installation or anything, by "install the required libraries" you mean I have to copy/paste the scripts & t folders in the Befehlsbibliothek "Libraries" (Version 3.2.08 ) to my installation and just start up X3:TC?

Can I copy/paste the CODEA scripts in there immediately as well, or should I first run TC with the libraries?

Saetan · Post by **Saetan** » Tue, 28. Apr 09, 18:01

aka1nas wrote:Also, I've tried using the method where I leave one of the CODEA carrier's ships at a Military Outpost (with a Lt. pilot installed , a CLS, and plenty of cargo space), but they never seem to recruit any personnel. How long should this normally take?

I'm not sure, but I think it must be a TP. And this method can take quite a while. When I had only one, I waited and waited and started to think, I found a bug. But it wasn't ... its just quite rare that a military transport docks at a station, where this single TP waits ... and after that, it's only getting personell of the pilots race.

So I started another three TPs and send them to different outposts or equipment docks ... now I've got quite a lot of personell ^^

DJSfinx wrote:Just to be sure I don't mess up my entire installation or anything, by "install the required libraries" you mean I have to copy/paste the scripts & t folders in the Befehlsbibliothek "Libraries" (Version 3.2.08 ) to my installation and just start up X3:TC?

Can I copy/paste the CODEA scripts in there immediately as well, or should I first run TC with the libraries?

Yes ... just unpack the library and codea into your x3:tc directory ... you can unpack both at the same time, before starting x3:tc. Just be sure, you've always got the latest available library ... also when updating codea or one of the other scripts by Lucike.

DJSfinx · Post by **DJSfinx** » Tue, 28. Apr 09, 18:59

Okay, this seems to be somewhat more complex than I imagined

Correct me if I'm wrong... I need personnel to equip my fighters with, and those I need to recruit at a Military Outpost? Are these guys marines or does it have nothing to do with them?

Stealth17 · Post by **Stealth17** » Tue, 28. Apr 09, 19:14

DJSfinx wrote:Okay, this seems to be somewhat more complex than I imagined Correct me if I'm wrong... I need personnel to equip my fighters with, and those I need to recruit at a Military Outpost? Are these guys marines or does it have nothing to do with them?

You should dock at a Military Outpost with your carrier (TM/TL/M7/M1) and go to Commands - Fight commands - CODEA Console. Select Hire and hire the personel on the base. These are NOT the marines!

DJSfinx · Post by **DJSfinx** » Tue, 28. Apr 09, 19:36

So far so good... now I managed to recruit some dude, put him in a Cutlass cockpit and he's listed under Pilots on standby.

But when I go to Attack Fighter Hangar, the Cutlass is not listed anywhere

The Cutlass has all the command software installed for CODEA Attack Fighter (fight MK1 & 2, nav 1, couple of lasers installed)

What am I doing wrong?

aka1nas · Post by **aka1nas** » Tue, 28. Apr 09, 22:28

DJSfinx wrote:So far so good... now I managed to recruit some dude, put him in a Cutlass cockpit and he's listed under Pilots on standby.

But when I go to Attack Fighter Hangar, the Cutlass is not listed anywhere
The Cutlass has all the command software installed for CODEA Attack Fighter (fight MK1 & 2, nav 1, couple of lasers installed)

What am I doing wrong?

Do you have any of the forbidden extensions installed on the cutlass (SETA, boost extension, Video Enhancement Goggles)?

DJSfinx · Post by **DJSfinx** » Tue, 28. Apr 09, 23:05

I have both SETA & boost on it, but was under the impression only the combination of all 3 should exclude it from being detected, as is the case for my personal M3 also docked.

After some clicking between all the menus and disabling/enabling CODEA however, it seems to have solved itself - so it's all good

I'm gonna have to work on a solid fighter force first though, then the fun can really begin

Canuckian · Post by **Canuckian** » Wed, 29. Apr 09, 05:58

I installed the MEFOS software mod to get the crew necessary to man the M8 Bombers.

Where can I hire Mechanics and Engineers? Do I just have to dock at a station before one of those blue military transports dock? Are the available crew I can hire random? One time I could hire 15... most times only 2. And I can never find a good Mechanic (any Mechanic so long as I can use my currently useless M8 Bomber)

Saetan · Post by **Saetan** » Wed, 29. Apr 09, 08:55

The available crew to hire is random, yes. But mechanics are quite rare to hire and any mechanic should do the job. There are no "ranks" for mechanics.

darkfear · Post by **darkfear** » Thu, 30. Apr 09, 00:09

Canuckian wrote:I installed the MEFOS software mod to get the crew necessary to man the M8 Bombers.

Where can I hire Mechanics and Engineers? Do I just have to dock at a station before one of those blue military transports dock? Are the available crew I can hire random? One time I could hire 15... most times only 2. And I can never find a good Mechanic (any Mechanic so long as I can use my currently useless M8 Bomber)

Dock at the station and save. Now just reload until you get your mechanics. That's how I did it to get my last 2 mechanics.

I have a flight of Eclipses armed with Thunderbolts. Each time they land they reset the missile fire probability to 0% but they do fire the missiles! What is the rule for this? They automatically check whether the target is worthy of the missile?
And if the ship is armed with different sorts of missiles, will the fighter pick the best missile for the job?
If I would attack a capital ship with my Eclipses armed with Thunderbolts and Wasps, would they first fire Wasps to distract the turrets and then the Thunderbolts?

They will use different missiles for different targets. The bigger the target, the bigger the missile.

Ok, I figured out what's wrong from the screenshots in the first post. My mechanics and technics are not showing up as part of the carrier's personnel. I ,um ,"liberated" this batch by taking over one the Military transports with the Cheat Scripts and transferring the personnel to my Panther. Out the airlock with the lot of them! Very Happy

Tried that out once too. This does not work. You have to use the honest way, or use save/reload described above.

darkfear · Post by **darkfear** » Thu, 30. Apr 09, 00:12

CODEA Weapon System
(Carrier Orbit Defense of Enemy Attack)
(Version 3.beta.05 - 22. April 2009)

[ external image ]

[ external image ] [ external image ]

->CODEA Weapon System (Version 3.beta.07)
-> Necessary "Libraries" (Please reinstall during the Update!)
-> CODEA Manual .PDF Not yet updated!

Prerequisites: X³ Terran Conflict version 1.3 or higher (not compatible with X³ Reunion) !!

28.04.2009 (Version 3.beta.06)

TL class tender ships will only retreat if they are attacked heavily by enemies in the inner security perimeter.
Pilots with confirmed kills are promoted more quickly.
Changed combat behavior of pilots of high rank with a high amount of kills
Weapon, missile and equipment selection improved.
Bombers can now use one of two attack formations.
Automatic weapon switching improved and expanded.
The long range missile attack of corvettes can now be toggled off.
All pilots can use combat drones for defense.
The personnel overview now displays a performance report of your pilots.
Losses are now logged. An analysis is coming at a later date.
Fixed error in deinstallation process.

29.04.2009 (Version 3.beta.07)

With the attack pattern hammer, bomber pilots will now calculate the amount of missiles to use by analyzing the enemies‘ shield strength.
The supply tender didn’t consider the supply factor. Fixed.
Equipment selection expanded.

[SCR] CODEA Weapon System [09-06-03 X3TC 3.beta.19]

New Version