You are the man!!fauxmight wrote:This addresses issues raised above by Avaricia and Moderato_bei_X
I found a workaround for the issue noted (by Avaricia) with Arch Linux and the game failing to start (specifically, X3TC_config failing to start).
If Arch has lib32-libpng installed, the dynamic linking loads /usr/lib32/libpng.so (softlink to /usr/lib32/libpng16.so.16.29.0) and this in turn fails because the libz.so.1 that is packaged with the game was already loaded so the 1.2.11 version of libz against which Arch's (32-bit) libpng is compiled cannot be loaded. (At least, it appears this is the issue.)Code: Select all
./X3TC_config: lib/libz.so.1: version 'ZLIB_1.2.9' not found (required by /usr/lib32/libpng16.so.16
The fix is to UNINSTALL lib32-libpng. This will require quite a few other multilib (32-bit) libraries and packages to be uninstalled as well, but when running
those other 32-bit packages requiring lib32-libpng will be removed as well. This will include lib32-gtk2, but the Steam version of X3TC_config will run without it. The GOG version will not. I can't resolve this situation with the GOG version at present.Code: Select all
pacman -Rc lib32-libpng
The issue of games saved not loading (brought up by Moderato_bei_X) was also solved for me with this fix. Apparently, if one uses the LD_PRELOAD work-around OR puts a libz.so.1.2.9 in the lib subdirectory of the Steam X3TC (replacing the game-installed libz.so.1), then while the game will start, MOST games saved will not correctly load. Apparently there is significant difference between the libz packages. If you REMOVE the Arch package as described above, this issue gets fixed, too.
If you are experiencing similar troubles but running a distro that is not Arch, try removing 32-bit libpng if you can. You may have other packages requiring 32-bit libpng, and if so, you may have to decide between running those and running X3TC; that's up to you.
X³: TC and AP - Linux support thread
Moderators: timon37, Moderators for English X Forum
Re: FIX FOR Arch Linux libz / libpng issue AND corrupt savegame issue
I think this is the best fix and it has worked for nearly 1000 hours now. The problem with ripping out all the lib32 stuff is that you might want to use it for something else. e.g. playing some other game on wine.Authorised wrote:If you rename the version of libz.so.1 in the ~/.local/share/Steam/SteamApps/common/X3 Terran Conflict/lib directory then it will use the system library and load just fine on Arch.
I had the same problem using a Gentoo system. Considering the system is designed to have libraries in both 32- and 64-bit formats, this confused me.
However, I found the solution to the ZLIB error message was rather simple. Delete all instances of libz.so.* from your game's "lib" and "game/lib" folders (the faulty library is in both). This forces the game to use the OS-installed ZLib instead, which will work correctly.
Granted, you'll have to repeat the steps when updating, but still, there you go.
However, I found the solution to the ZLIB error message was rather simple. Delete all instances of libz.so.* from your game's "lib" and "game/lib" folders (the faulty library is in both). This forces the game to use the OS-installed ZLib instead, which will work correctly.
Granted, you'll have to repeat the steps when updating, but still, there you go.
Hello. I have some problems with launching:
Nothing happens after this messages. How it may be fixed?
Strace:
UPD: Not actual, solved with reboot.
Code: Select all
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Strace:
Code: Select all
access("/proc/cpuinfo", F_OK) = 0
openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(6, "processor\t: 0\nvendor_id\t: Authen"..., 1024) = 1024
read(6, "nment\t: 64\naddress sizes\t: 48 bi"..., 1024) = 1024
read(6, "gs\t\t: fxsave_leak sysret_ss_attr"..., 1024) = 1024
read(6, " vmmcall arat npt lbrv svm_lock "..., 1024) = 1024
read(6, "misalignsse 3dnowprefetch osvw i"..., 1024) = 1024
read(6, "clmulqdq monitor ssse3 cx16 sse4"..., 1024) = 1024
read(6, "call nx mmxext fxsr_opt pdpe1gb "..., 1024) = 690
read(6, "", 1024) = 0
close(6) = 0
getpid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
gettid() = 16347
pipe([6, 7]) = 0
gettid() = 16347
socket(AF_INET, SOCK_STREAM, IPPROTO_TCP) = 8
fcntl64(8, F_GETFD) = 0
fcntl64(8, F_SETFD, FD_CLOEXEC) = 0
setsockopt(8, SOL_TCP, TCP_NODELAY, [1], 4) = 0
connect(8, {sa_family=AF_INET, sin_port=htons(57343), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
getpid() = 16347
gettid() = 16347
send(8, "\r\0\0\0", 4, MSG_NOSIGNAL) = 4
send(8, "\t\1\0\0\0\333?\0\0\333?\0\0", 13, MSG_NOSIGNAL) = 13
poll([{fd=8, events=POLLIN}], 1, 180000) = 1 ([{fd=8, revents=POLLIN}])
recv(8, "\f\0\0\0\7", 5, 0) = 5
recv(8, "\25\0\0*\25\0\0\305\"\200\356", 11, 0) = 11
poll([{fd=8, events=POLLIN}], 1, 0) = 0 (Timeout)
poll([{fd=8, events=POLLIN}], 1, 180000
My desktop (Plasma)/Xorg build uses libinput, and xset is therefore irrelevant. xset m affects nothing, X3 included.timon37 wrote:Can you investigate this a bit further on your system and see if you come up with any conclusions, mainly about what is affected by xset m (and other settings) on your system (e.g. desktop, x3, other games, other 32bit games using sdl2 fullscreen)
Changing the mouse acceleration with xinput affects the desktop and everything else I have installed, except X3, which appears to have no mouse acceleration at all and ignores any xorg settings for such.
I do not have any other fullscreen 32bit SDL applications on hand, if you can suggest a test case I will try it.
Incidentally, I have just moved from Debian Stable to Artix (Arch) and see exactly the same problem, so I doubt system installed libraries are at fault here.
No difference observed when starting with / without the bundled libSDL loaded either.
This is ridiculous, kludgy window manager overrides are not the answer, please implement a mouse sensitivity setting like a sane developer.timon37 wrote:A workaround is playing in windowed mode
You've been digging around in the input code anyway WRT controllers, why do we get input scaling there and not for mouse? Both input sources are via libsdl, no?
Game does not start with nivida 1080TI 11GB GDDR5 in linux (initial screen either)
Hi,
I have linux and I have changed the grafic card from nvidia 660 2GB GDDR5 to nvidia 1080 TI 11GB GDDR5. Now the game doesnt start (steam plattform). The initial coniguration screen doesnt start neither.
In other pc with linux but nvidia series 600 the game works correctly.
X Rebirth works fine (including controller Thrustmaster T.16000M with throttle) with this device graffic, howewer x3: Terran conflict doesnt start.
My specifications:
driver: nvidia 390.12
grafic: nvidia 1080 TI 11GB
Operative System: Ubuntu 17.10 64 bits
Kernel: Linux 4.13.0
Ram: 16GB
Processor: Intel core i7-4770k 3.50Hzx8
How can I solve that? Is there some kind of log?
Regards
I have linux and I have changed the grafic card from nvidia 660 2GB GDDR5 to nvidia 1080 TI 11GB GDDR5. Now the game doesnt start (steam plattform). The initial coniguration screen doesnt start neither.
In other pc with linux but nvidia series 600 the game works correctly.
X Rebirth works fine (including controller Thrustmaster T.16000M with throttle) with this device graffic, howewer x3: Terran conflict doesnt start.
My specifications:
driver: nvidia 390.12
grafic: nvidia 1080 TI 11GB
Operative System: Ubuntu 17.10 64 bits
Kernel: Linux 4.13.0
Ram: 16GB
Processor: Intel core i7-4770k 3.50Hzx8
How can I solve that? Is there some kind of log?
Regards
-
- Moderator (English)
- Posts: 30575
- Joined: Fri, 16. Apr 04, 19:21
@ Gelux: I moved your issue to the Linux support thread.
Have you tried a clean* reinstall or update (if possible) of the Nvidia graphics driver for your new card with Linux in case there is an issue with its installation or that remnants of the driver for the old card were left behind?
* 'Clean' meaning that the old and current driver are completely uninstalled before the new version is installed or reinstalled.
If you can then get as far as the initial small in-game splash screen, it may be worth then selecting the 'Graphics Settings' button and choosing 'Reset to Default' before you go any further.
Have you tried a clean* reinstall or update (if possible) of the Nvidia graphics driver for your new card with Linux in case there is an issue with its installation or that remnants of the driver for the old card were left behind?
* 'Clean' meaning that the old and current driver are completely uninstalled before the new version is installed or reinstalled.
If you can then get as far as the initial small in-game splash screen, it may be worth then selecting the 'Graphics Settings' button and choosing 'Reset to Default' before you go any further.
A dog has a master; a cat has domestic staff.
Hi
Thank you for moving my issue.
I have been searching the game log and I found an error of steam libraries (gameoverlayrenderer.so). Then I tried to start the game directly from directory files and the game run correctly, but without the initial little screen.
Then now I can play, and my problem is resolved. The change of device has been a casuality. The problem is that Steam is not able to start the game.
Thanks for your help.
Regards
[/b]
Thank you for moving my issue.
I have been searching the game log and I found an error of steam libraries (gameoverlayrenderer.so). Then I tried to start the game directly from directory files and the game run correctly, but without the initial little screen.
Then now I can play, and my problem is resolved. The change of device has been a casuality. The problem is that Steam is not able to start the game.
Thanks for your help.
Regards
[/b]
- proggy3456
- Posts: 2027
- Joined: Sun, 6. Apr 03, 18:57
Hi,
just chiming in to say I also have the same issue with being unable to launch any X3 title from within Steam but it works fine if I start the main game executable directly.
Turns out that the file lib/libz.so.1 is an old version that my system's libpng16.so is not linked against (my system has zlib 1.2.11). Simply deleting the former file and X3 starts properly again using Steam.
I would love to see a permanent fix for this.
Cheers,
proggy
just chiming in to say I also have the same issue with being unable to launch any X3 title from within Steam but it works fine if I start the main game executable directly.
Turns out that the file lib/libz.so.1 is an old version that my system's libpng16.so is not linked against (my system has zlib 1.2.11). Simply deleting the former file and X3 starts properly again using Steam.
Code: Select all
$ ./X3R_config
./X3R_config: lib/libz.so.1: version `ZLIB_1.2.9' not found (required by /usr/lib32/libpng16.so.16)
$ ldd /usr/lib32/libpng16.so.16
linux-gate.so.1 (0xf7f36000)
libz.so.1 => /usr/lib32/libz.so.1 (0xf7e97000)
libm.so.6 => /usr/lib32/libm.so.6 (0xf7dcc000)
libc.so.6 => /usr/lib32/libc.so.6 (0xf7bf3000)
/usr/lib/ld-linux.so.2 (0xf7f38000)
Cheers,
proggy
The GOG version 3.3 of this game doesn't work for me on Ubuntu 18.04.
I had the libz error, which I fixed with the workarounds posted in this thread. That makes it so the game launcher works, but when I click "Start X3:TC" I get the following error:
I also own this game on Steam, and after fixing the libz error there, I'm able to successfully play by starting it through the Steam client. But curiously enough, if I try starting the game from the command line by executing either X3TC_config or X3TC_main in my Steam folder, I get the same error:
Does anyone know how to fix this error?
I had the libz error, which I fixed with the workarounds posted in this thread. That makes it so the game launcher works, but when I click "Start X3:TC" I get the following error:
Code: Select all
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Video category:
Monitor Idx = 0
Width = 1920
Height = 1080
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 0
Texture Quality = 2
Shader Quality = 2
AA Mode = 2
AF Mode = 2
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 205
Music Volume = 215
Input category:
Mouse Grab = 1
Joy Index = 0
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Mod Name = (null)
Capture Folder = screenshots
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
Unable to initialise graphical subsystem
Code: Select all
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Setting breakpad minidump AppID = 2820
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197983749951 [API loaded no]
Video category:
Monitor Idx = 0
Width = 1920
Height = 1080
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 0
Texture Quality = 2
Shader Quality = 2
AA Mode = 2
AF Mode = 2
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 205
Music Volume = 215
Input category:
Mouse Grab = 1
Joy Index = 0
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Mod Name = (null)
Capture Folder = screenshots
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
Unable to initialise graphical subsystem
Guess: steam is launching it with it's bundled libraries, AKA the "steam-runtime". A quick test would be to launch steam with STEAM_RUNTIME=0, and see if you get the same error.compo wrote:I'm able to successfully play by starting it through the Steam client. But curiously enough, if I try starting the game from the command line by executing either X3TC_config or X3TC_main in my Steam folder, I get the same error
Specifically, no. In general, it's almost certainly a missing library or incompatible version. X3 is pretty vague with its error messages.compo wrote:Does anyone know how to fix this error?
The last time I ran into this solving it was a matter of trial and error, copying libraries from ~/.local/share/Steam/ubuntu12_32/steam-runtime/ (IIRC) to the GOG libs directory until I found the culprit.
Re: X³: TC and AP - Linux support thread
I have a saved game from when I played X3AP on Windows that doesn't load and causes a CTD in Linux. I can start a new game in Linux and I can even load an older Autosave (by older I mean like 3 days older) but I can't get my primary saved game to load. I tried it on Windows 10 again just to be sure and my saved game loads fine. So, something in my saved game is angering the Linux client. What can I do? The only error I'm seeing is a core dump.
EDIT: I have the GOG linux version... the War Pack.
EDIT: I have the GOG linux version... the War Pack.
-
- Moderator (English)
- Posts: 30575
- Joined: Fri, 16. Apr 04, 19:21
Re: X³: TC and AP - Linux support thread
@ ncc386: Purely going by previous recent posts in this thread, make sure that your Linux system has unrestricted access to the same libraries and versions as your Windows system. That said, I don't know why that would affect one save but not another.
Another thing to check if you have copied the save across between systems (say on a disc or thumbdrive) is that the transit media has not encrypted, compressed or changed the flags on the save. Also it could be that the copy has just somehow corrupted during the copy process leaving the original intact.
Another thing to check if you have copied the save across between systems (say on a disc or thumbdrive) is that the transit media has not encrypted, compressed or changed the flags on the save. Also it could be that the copy has just somehow corrupted during the copy process leaving the original intact.
A dog has a master; a cat has domestic staff.
Re: X³: TC and AP - Linux support thread
Everything is peachy to the best of my knowledge. For science, I'm going to re-copy the saved games again but after that, I'm lost.
-
- Moderator (English)
- Posts: 3230
- Joined: Mon, 14. Jul 08, 13:07
Re: X³: TC and AP - Linux support thread
ncc386, if your save is from vanilla game, could you upload it to some file hosting? I could try loading it on my Linux machine, see what happens.
Re: X³: TC and AP - Linux support thread
I tried my backups and the autosaves work but the main save still doesn't. About to load it on a Windows machine and resave it and try that. I can totes email you my save file or something if you want. That would be great.
-
- Moderator (English)
- Posts: 3230
- Joined: Mon, 14. Jul 08, 13:07
Re: X³: TC and AP - Linux support thread
Could you just upload to some file hosting like dropbox and then share a link here or via PM?
-
- Moderator (English)
- Posts: 3230
- Joined: Mon, 14. Jul 08, 13:07
Re: X³: TC and AP - Linux support thread
Well, the save loaded just fine here, so whatever the problem is it isn't "just" Linux, perhaps some library issue? Maybe if you run Steam, or even just the X3AP_main binary itself, from console you could get a clue from the output?
PS: I like your ship names.
PS: I like your ship names.