[#3863][7.50] PAR Plot - Apotheosis: Cut scene camera focus is incorrect depending on order of switches

Ask here if you experience technical problems with X4: Foundations.

Moderator: Moderators for English X Forum

User avatar
Fluggonaut
Posts: 53
Joined: Fri, 16. Aug 13, 12:58
x4

[#3863][7.50] PAR Plot - Apotheosis: Cut scene camera focus is incorrect depending on order of switches

Post by Fluggonaut »

This is a small one; the shield-go-down cut scenes can have its camera focus on the wrong weak point. Or rather: The target switches are not directly linked to their specific weak points but instead linked to their specific camera.

Steps to reproduce
  1. Load the savegame. Situation: We are in the cocoon room right in front of the two target switches that open up the two weak points.
  2. Shoot the left one (!) and observe the cut scene. We see one of the weak points (with shields up) that does absolutely nothing. However, due to camera rotation, we can see the shield of the other weak point opening up in the background.
  3. Shoot the right one and observe the cut scene. We see the other weak point (shields down) that again does nothing. Again, in the background we briefly see the shield of the other weak point going down.
If we reload the savegame and do it the other way around (right one first, left one second), the camera has the correct focus each time.
Last edited by Tranxalive on Fri, 25. Apr 25, 16:28, edited 1 time in total.
Reason: Adding Mantis Report number.

Return to “X4: Foundations - Technical Support”