[SCRIPT] Advanced Jumpdrive V1.22 : Updated 22/07/2015

The place to discuss scripting and game modifications for X³: Terran Conflict and X³: Albion Prelude.

Moderators: Scripting / Modding Moderators, Moderators for English X Forum

Retiredman
Posts: 795
Joined: Fri, 4. Sep 09, 02:35
x3ap

Post by Retiredman »

Cycrow.

What would cause the adv jumpdrive to have a neeed for e-cells when all wares for the adv jumpdrive have been installed?


[ external image ]
(Referencing your image from this thread)


Where it shows unlimited for unlimited I get
x cell for x jumps.

and

The FTL option is not shown.

This occured on a new start.

The previous game is exactly as above.
Unlimited & FTL option shown..

Is there any thing I can check to see if it can be corrected?
It has me baffled.
You think a hero is some weird sandwitch and not a guy attacking a Xeno J with a kestrel.

Sir.. I said .. A guy attacking a J with a kestrel is the sandwitch.
Cycrow
Moderator (Script&Mod)
Moderator (Script&Mod)
Posts: 22436
Joined: Sun, 14. Nov 04, 23:26
x4

Post by Cycrow »

first thing to check is to make sure the ship your running it on is the ship you have the wares on.

perhaps your running from a different ship by mistake ?

also it could bep ossible that the scripts are pointing to the wrong wares.
what version do you have installed ?
also what version of the plugin manager was used, and you do have any other mods (specifically ones with wares) do you have loaded?
Retiredman
Posts: 795
Joined: Fri, 4. Sep 09, 02:35
x3ap

Post by Retiredman »

So many mods I can't count them..
(60+ scripts)No AHD jumpdrive script.
(Cadius pack-Varies starts, AWRM,Tubless,TSOG etc) All fake patched - old way.


Using the lasest version of advance jump drive(1.20) and overrides(1.0).

Plugin manager lite 1.4 -beta 6(What it shows at the top)

The previous game the Jumpdrive ran fine..

I can try to start a new temp game and see if it is corrected.

if the save game parms are set then it's fooboo'ed

If going back to a vanilla load(I have spares) and reloading the scripts and mods
will fix it then so be it.
You think a hero is some weird sandwitch and not a guy attacking a Xeno J with a kestrel.

Sir.. I said .. A guy attacking a J with a kestrel is the sandwitch.
Cycrow
Moderator (Script&Mod)
Moderator (Script&Mod)
Posts: 22436
Joined: Sun, 14. Nov 04, 23:26
x4

Post by Cycrow »

yeah try starting a new game and added the Advanced jumpdrive via the cheat menu, and see if that solves it
Retiredman
Posts: 795
Joined: Fri, 4. Sep 09, 02:35
x3ap

Post by Retiredman »

New temp game.. No Go

Loaded the game before the present one, right after ending temp game and it worked like what it should have..

Lost.. I guess I play it as it is..

Thanks anyways..

addedum:

Docked at the OTAS station and it sold the adv jumpdrive and accelerator
only:

Got the unlimited jump back but the wares show as:
ZA_EMP_BLANK_WARE_CUSTOM19_12
ZA_EMP_BLANK_WARE_CUSTOM20_15


FTL Jumpdrive extension shows as worded. But does't give FTL sector jumps.

Removed all previous Jumpdrives and accelerator wares from ships but the numbers are still there..
Not to worried.. I got the unlimited back and can live with the ZA numbers.
You think a hero is some weird sandwitch and not a guy attacking a Xeno J with a kestrel.

Sir.. I said .. A guy attacking a J with a kestrel is the sandwitch.
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

I know man I have that problem all the time. The Adjump Drive and such is the foundation of my games and I try to make everything work around it. It only works 100% half the time. It's frustrating. The wares don't show the general commands sometimes don't show, and in the stations it don't show it sometimes. It's not the drive/script, it's everything else fighting for the slots it uses.
Phosphene
Posts: 57
Joined: Mon, 26. May 08, 07:23
x3tc

Post by Phosphene »

This may sound really weird but (also bear in mind I've never used the script) my only problem with the Advanced Jump Drive is that it does NOT use energy cells. Can someone explain to me why this is not basically a total cheat?

I mean don't get me wrong I love the idea and you sold me already on it I'm just saying, it seems like a MINOR cop out...


Oh and where do you purchase the AJD?
garrry34
Posts: 911
Joined: Sun, 17. Jul 05, 14:43
x3tc

Post by garrry34 »

it because the energy cell generator is an expensive peice of equipment to balance it out...
PhenomII X4 940 black edition
8GB DDR2
ATI HD4890
Windows 7 64bit
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

Ok, I give up. What would cause the Advanced Jump Drive to stop showing up in the "Additional Ship commands" window. I re-installed my steam version of X3TC, I only installed the plug in manager and the Advanced Jumpdrive, Navigation software with overrides, and Ad. Thruster Controls. I have no mods added and it ADJD just doesnt' work. My advanced navigation controls don't show up also. And I also started a new game. :cry:
garrry34
Posts: 911
Joined: Sun, 17. Jul 05, 14:43
x3tc

Post by garrry34 »

this may seem a silly question but is your plugin manager still open when you start the game, if so make sure it is closed and start up the game again...
PhenomII X4 940 black edition
8GB DDR2
ATI HD4890
Windows 7 64bit
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

I have been told to open it, I have been told to close it. I'll try both ways now and see.
garrry34
Posts: 911
Joined: Sun, 17. Jul 05, 14:43
x3tc

Post by garrry34 »

I have learnt from doing it myself, if the plugin manager is open when I start the game the adv jump equipment shows up as the funky text...
PhenomII X4 940 black edition
8GB DDR2
ATI HD4890
Windows 7 64bit
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

Does that apply if you start a new game? Because my saved game shows up as ZA_EMP_Blank_WARE_CUSTOM#_# (Funky Text). And and they still don't work. I love the AD Drive, but I give up. I think it's time it's up dated. I'm going to do my best to do it as my first script modification. I LOVE this script but it's too touchy.
garrry34
Posts: 911
Joined: Sun, 17. Jul 05, 14:43
x3tc

Post by garrry34 »

I would say yes because if the plugin manager is open when you start the game it hasn't finalised the files it creates in the types folder and the game loads the data that is present when you hit start...
PhenomII X4 940 black edition
8GB DDR2
ATI HD4890
Windows 7 64bit
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

Now I know. I'm learning so much from you all. Thank you very much. I'll always close it now.
garrry34
Posts: 911
Joined: Sun, 17. Jul 05, 14:43
x3tc

Post by garrry34 »

all fixed?
PhenomII X4 940 black edition
8GB DDR2
ATI HD4890
Windows 7 64bit
Cycrow
Moderator (Script&Mod)
Moderator (Script&Mod)
Posts: 22436
Joined: Sun, 14. Nov 04, 23:26
x4

Post by Cycrow »

yeah the plugin manager must be closed before running the game, otherwise the ware files wont be created.

another way would be to manually install EMP as a fake patch, making sure its the last patch used.

just make sure you get the correct version of EMP, which would be the latest EMP-X
Maxces C Covert
Posts: 57
Joined: Tue, 5. Jun 07, 02:02
x3

Post by Maxces C Covert »

EMP-X? Man I wish I would have know. I have been reading the forums, checking responses, and that's the first time I heard EMP referred to as EMP-X. I hope there is a good link to it. I really hope it fixes everything.

OK, 50 min search and no dice.

"Announcement: [Index] Community Script & Mod Download Library for X3: Terran Conflict" = No EMP-X
"[PROGRAM] Plugin Manager Lite : V1.30 : 30/03/2011" 20 pages" worth, no EMP-X..

Please post it with a sticky link etc for us all. I have been seeing the ware problem all over. Maybe this is the root problem?

Ok... I think I found it...

And it worked! The ADjumpdrive shows up and works! Finally. I can play.
http://www.after-domination.net/phpbb3/ ... ?f=28&t=92

Middle of the page it states "EMP-X-2.7.rar [29.19 KiB]
Downloaded 4886 times"
User avatar
Drewgamer
Posts: 536
Joined: Fri, 27. Aug 10, 08:39
x4

Post by Drewgamer »

I noticed that every time I load a saved game there is a brief pause (as if things are initializing or something) that causes my ship to accelerate all of a sudden. When this happens, the names of all my advanced jump-drive wares change to ZA_*something-or-other*. Everything still works properly (mostly, see below) but the names are all messed up. Saving or autosaving fixes the naming issue.

Second "issue", the FTL drive seems kinda buggy or something. I've yet to actually FTL to where I set it. The larger the ship, the prevalent this problem is. I assume this is due to some kind of collision detection? With some of the really big ships (such as the mobile research ship from XRM) it will even go so far as to jump you randomly around the sector :(
Check out my mod Crystal Rarities
User avatar
Rickjames125
Posts: 41
Joined: Mon, 7. Sep 09, 01:59
x3tc

Advanced Jumpdrive and CEMP issues

Post by Rickjames125 »

So after reinstalling a fresh copy of TC I ran into some issues installing the Advanced Jumpdrive by Cycrow using his plugin installer. I installed the required Community Extended Mod Pack in spk form as well but the modules he lists that are supposed to show up aren't. I was willling to tet it out by using his cheat script and thats how im trying to addit to my ship but its nowhere to be found and many other weird equipment names such as SS_WARE NEW and EMP_CUSTOM_WAREbasically show along with the vanilla equipment. Anyone care to help a returning player out?


{[url=http://forum.egosoft.com/viewtopic.php?t=216696][b]T[/b][b]C[/b] [b]S[/b]&M Posting [b]R[/b]ules[/url]. Merged to AdvJD thread. jlehtone}

Return to “X³: Terran Conflict / Albion Prelude - Scripts and Modding”