Joint Long Range Scan in Feynmann Mission

[lardybloke]

I have three Discoveries at the nav beacons but I don't know how to get them to do a joint long range scan. I have tried being in one of them, gettingthem to join my wing using {Shift 3} for long range scan and trying the mimic order and I have tried the same from a fourth ship with the three Discoveries in my wing and trying to mimic order.

[TheDeliveryMan]

All I had to do was positioning two of my ships inside two of the yellow spheres and flying my ship inside the third sphere. Then Feynman told me to initiate a long range scan.

[ChrisF0001]

At risk of stating the obvious - when I got to this point I'd completely forgotten that you actually have to manually do the 'hold and release the button' thing for a long range scan. I hadn't done one in person practically since release, and had to re-Google how long range scanning even works. But then, I guess it's just positioning - as long as you have ships in the right place I don't think anything more is required.

[lardybloke]

Thank you

I am doing all of that, what am I looking for? I get the "do a long range scan" instruction. What happens next?

[lardybloke]

Got it now. I also had to learn how to use the long range scan properly again, using the R button.

[joe2020]

Hi,
Could someone explain what are the steps to get this mission to work? I did the following:
1) placed 3 ships (using Fly To command) at designated nav points
2) teleported to one of the ships and turned on Long Range Scan (L shift + 3)

After that ship cockpit turned blue and the message about Long Range Scan being activated showed up (in ship display, on the left) but mission did not progress.
Is there another step to this? I'd appreciate any help, can't complete mission at this point.
Thanks!

[Raptor34]

Hi,
Could someone explain what are the steps to get this mission to work? I did the following:
1) placed 3 ships (using Fly To command) at designated nav points
2) teleported to one of the ships and turned on Long Range Scan (L shift + 3)

After that ship cockpit turned blue and the message about Long Range Scan being activated showed up (in ship display, on the left) but mission did not progress.
Is there another step to this? I'd appreciate any help, can't complete mission at this point.
Thanks!

Leave the 3 ships.
Take ANOTHER ship and Long Range scan from it. Not sure how close you have to be but I was somewhat close and looking at the 3 ships.
So technically you'll be having 5 ships doing LR scan. The Oberoth, the 3 ships at the beacon, your personal ship.

And also you do know that after entering LR scan mode you need to hold and release R to scan right?

[milytar]

I was 5 sector away when initiated long range scan and it works so be sure you positioned other ships if you have them(easy to force bail some SCA fighters) to marked location via map and just LRS and you dont want to be one of the ship or same sector!

[joe2020]

Hi,
Thanks for all the answers, I'll describe what worked for me.
Looks like three ships are enough to finish this mission. I placed each of those in designated locations then teleported to one of them (any one works).
Then I started the long range scan (Shift + 3), your ship's cockpit should turn blue. Then I did the thing I was missing (thanks for that tip), I pressed and held the R button until a blue line appeared, then I released the R button. That sent the "sonar" ping (quotes because space does not carry sound) which in turn completed the mission.
I've been playing X4 from the day it came out and yesterday was the first time I used the R button =) Now I know why it was so hard to find all those lock boxes (sigh).

About lock boxes - when you see a yellow question mark appear on the map fly in that direction, then start your long range scan and move ship around while firing "sonar" pulses (R).
If there is a lock box it will be marked by a yellow pulsating circle.
Thanks again for all the help!

Joe

[underworld3]

I know this is years later, but I have just got into this game and once I got past my learning curve its become really good. However, I have spent nearly an hour trying to get this mission done. Im not sure if this is a spoiler as Im posting this out of frustration. I will mark it as a spoiler so you dont read it by accident.

Spoiler

Show

I tried different ships, going through jump gates to different regions to scan. Nothing worked. Eventually I figured it out. 3 ships, each one in the vicinity of the specified beacons. You need to be on one of the ships. Then when the white sensor wave (being transmitted from the Segaris Pioneers ship) approaches..... then and only then should you scan. You need to scan into the Segaris Pioneers sensor wave. Any other time, and your scan wont succeed. You only need to scan from one ship. The other two ships just need to be near the specified beacons.