[ALP] Upgrade Kits (JDK) 1.5 TC 9/12/08

[A_Li_N]

I'm having the opposite happen...instead of not being stocked at all, I have thousands of them in the GF factory...full stock. And I installed it yesterday.

Don't know if that would be intended or not, and thought I'd let ya know

[damador]

got some problems - "jumpdrive already installed" - on fresh ships (installed all common software - trade mk 1 mk2 , fighter mk1 mk2 , navigation mk1 - but not jumpdrive )

[damador]

got some problems - "jumpdrive already installed" - on fresh ships (installed all common software - trade mk 1 mk2 , fighter mk1 mk2 , navigation mk1 - but not jumpdrive )

ok - solved i need to put jdk on ship ...

but another problem - sometimes i see ware name as BLANK_ ..... after docking it is fixed again ...

[okman2]

I believe I have done everything that is suppose to be done to run this scrpit. But when I go to jumpdrive station it says there are kits available but does not show any finished products for sale. Help Please...

[alex2069]

What have I done wrong?

It is showing up as ZA_EMP_BLANK_WARE_CUSTOM7_7. It installs correctly, and in the command console it shows up as "Install Jumpdrive" (and works). I'm using EMP (not the SPK version), set as a mod, and I installed the via. the SPK if that makes any difference.

[LV]

Help Please...

sounds like you do not have the emp mod installed, read the first post again to check

What have I done wrong?

check your scripts folder and see if there is a setup.a.a.a.emp script in there, if there is delete it

[alex2069]

There's an 'init.a.a.a.emp.xml', but no setup one.

Also, a little more info - If I go to the station info ('i' -> 'u') it shows up as 'Jumpdrive Kit'. But docking and trading, as well as in-ship freight shows up as the CUSTOM7_7.
Scorps map has it as 'Jumpdrive Kit' as well.

[Golf33]

I'm getting the same thing - the station appears, it's title says it has kits available, but station info shows no products - just resources.

I've installed the EMP pack (unpacked version) and selected using in the 'select mod' button on the X3 startup menu.

I've installed the JDK script using PlugMan beta 6.

Is there anything else I can check to get this working?

[LV]

if any of you have the cheats installed the neutral ware "garbage" should be available (i used that for the JDK before emp) if garbage does not exist let me know,

i'll also repack it later tonight and re-upload just on the chance i dropped a bollock somewhere

[LV]

i've repacked the 1.1 cycrow version and re uploaded it (see first post)



you need to turn the plugin off first to disable the current version

then save uninstall the old one then install this and let me know if the problems dissapear

[Golf33]

Done that. I think I might still have the problem. Using the new spk version from page 1 of this thread.

Using your cheats "Add any ware" I don't see "Garbage" or "Jumpdrive Kit" on the list of wares.

I do see "Jumpdrive", "Jumpdrive Components", "Labour Kits" and "Unfocussed jumpdrive".

Here's the plug-ins report from PlugMan:

Script Packages:
Cheat Collection Package :: Cycrow :: Yes/Yes :: 1.41 :: 07/11/2008
Command Queueing :: Cycrow :: Yes/Yes :: 1.10 :: 30/10/2008
Community Plugin Configuration :: Cycrow :: Yes/Yes :: 1.10 :: 28/10/2008
Freight Transporter Upgrade :: Lord Vader :: Yes/Yes :: 1.2 TC :: 23/10/2008
Improved Boarding :: Cycrow :: Yes/Yes :: 1.10 :: 28/10/2008
Jumpdrive Kits :: Lord Vader :: Yes/Yes :: 1.1 TC :: 10/11/2008
Marine Repairs :: Tatakau :: Yes/Yes :: 1.01 :: 01/11/2008
Medusa Rapid Fire Missile Interface :: Lord Vader :: Yes/Yes :: 1.1 TC :: 23/10/2008
NPC Bailing Addon :: ThisIsHarsh :: Yes/Yes :: 1.4 :: 31/10/2008
Salvage Claim Software :: Cycrow :: Yes/Yes :: 1.00 :: 25/10/2008
Salvage Commands and NPCs :: ThisIsHarsh :: Yes/Yes :: 1.1 :: 01/11/2008
Satellite Early Warning Network :: Cycrow :: Yes/Yes :: 1.20 :: 31/10/2008
Wing hotkeys :: Cycrow :: Yes/Yes :: 1.10 :: 28/10/2008

[LV]

I've started a fresh game and the kits were there (although my goner rank was too low at the JDK fab in getsu fune)

I still have no issues so either one of the other scripts is conflicting which I seriously doubt or there is an install issue


re-download again the via the link in the FP and also download the EMP mod again as i've repacked that just on the chance it was emp related but everything is fine for me

[Thrandisher]

Sounds like the same problem im haveing. Theres somewhat of a discusison of it over on the Slave Claim Software thread right now.
JDK's show up fine up untill i install SCS then they go blank for me.

Im sure its eather a EMP, PM, or SCS problem.

I see a new script out that i can try with JKD and see if it causes the problems also, but im still wakeing up and it will be a few hours before i dive into it.

I see the JDK fine, then when i install SCS they go blank on the JDK dock, and in frieght, but i can still use the ship commands and install them.

[alex2069]

I've updated to the repacked version, and it still is unnamed (ZA...CUSTOM7_7 thingy) in freight and at dock (station information is named correctly as "Jumpdrive kit").
I do however have a ware called "Garbage", is that good or bad? lol

Edit: As in, I have the ware in the ware list, but I don't actually have any of it in my freight or anything.

[damador]

i've repacked the 1.1 cycrow version and re uploaded it (see first post)



you need to turn the plugin off first to disable the current version

then save uninstall the old one then install this and let me know if the problems dissapear

game hang .... also 1.2 is shown as 1.1 in plugin manager

checked twice

turned AI to off - w8 ~20 minutes save
uninstalled save
played for 10 minutes save
installed via cycrow manager save

ebaled plugin in AI setting game hangs (sound loop, mouse freeze ... ) after ~5 minutes

turning JDK AI to off will prevent hang .. but JDK dont show ...

[Golf33]

I've started a fresh game and the kits were there (although my goner rank was too low at the JDK fab in getsu fune)

I still have no issues so either one of the other scripts is conflicting which I seriously doubt or there is an install issue


re-download again the via the link in the FP and also download the EMP mod again as i've repacked that just on the chance it was emp related but everything is fine for me

That fixed the JDK problem - they are now listed in the wares and the factory produces them.

However now I have a conflict between emp and the salvage claim software - the salvage claim software now shows up as ZA_EMP_BLANK_WARE_CUSTOM1_2.

I tried enabling custom wares in plugman and ticking emp on the custom wares page. This restored the salvage claim software, but now the jumpdrive kit is missing from the wares list again.

[morbideth]

LV, there is a conflict with CLS mk1. Specifically the "CLS on standby..." command is the same as the "Install jumpdrive" (use.kit) command. Can you change it please?

[okman2]

I quit...the damn thing just isnt working.

[okman2]

SUCCESS!!!

[LV]

LV, there is a conflict with CLS mk1. Specifically the "CLS on standby..." command is the same as the "Install jumpdrive" (use.kit) command. Can you change it please?

[MOD HAT ON]
i will consider this next update as a one off, the script index has plenty of room and only because it's a ported non EN language script made around the same time as JDK will i do this as people should check other forum indexes if they intend to port[/MOD HAT OFF]

[Helmet on]
Why does everyone feel the need to use the dame bloody commands & t file numbers as me