[BONUS Plug-In] Trade Command Software MK3

Scarecrow · Post by **Scarecrow** » Mon, 19. Jul 04, 06:51

Take a deep breath

It just went up today

Grey Mark · Post by **Grey Mark** » Mon, 19. Jul 04, 07:22

I now have a choice. Revert to a save game before I put in two facs and bought 4 new ships and swapped the MK3 from a manta to a Pirate Ship (was level 10) which is now re-set to 0

, or just treat it as another day in X universe?

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 08:16

DemaeRamen Said:

Sorry to be a doofus but how do I install it?

Do I just overwrite/copy it into the X2 folder?

Well im a doofus to coz I'd like to know where to install it, its trying to install onto my Desktop at the mo, but the instructions say that i have to Point it towards my Exe path???????????

Can anyone help?

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 08:22

Can no-one help?

Filinn · Post by **Filinn** » Mon, 19. Jul 04, 08:23

Check your PM inbox

EDIT: and use your MSN. real-time instructions are always better understandable

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 08:28

Hiya this is where im up to:
I can download the file alright but im not to sure where to install it to, at the moment the default installation target is my Desktop.
The instructions with it say:

This will install the "Trade Command Extension MK3".
Please makre sure the extraction path points to the path where your x2.exe is

So what does that mean?

The_Abyss · Post by **The_Abyss** » Mon, 19. Jul 04, 08:30

Your X2.exe would normally be found in something similar to this:

C:\Program Files\EGOSOFT\X2-The Threat\

This will vary from region to region and hence version to version of course.

Filinn · Post by **Filinn** » Mon, 19. Jul 04, 08:35

or it can be - according to the previous post - C:\Program Files\Enlight\X2 - The Threat

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 08:37

Cheers to both of you, i owe you both a couple of pints, what will it be,
Calsberg, Bud, Castlemain, Stella??

terrabyte · Post by **terrabyte** » Mon, 19. Jul 04, 08:38

Nice work BurnIt, Universal Trader, trading away

It made a nice story as well http://www.x2ou.com

Lutzie · Post by **Lutzie** » Mon, 19. Jul 04, 08:38

So lets get this straight then

1: Simply D/L the new TMK3
2: Re-order our current traders to begin sector trader.
3: Give them a minimum of 25mw of Shields and Fighting Software 1 & 2. Nothing more
4: The "universe Trader" should now be available.

Is that right?

Sorry, 4pages is too much to read at half seven in the morning...

XU Vagabond · Post by **XU Vagabond** » Mon, 19. Jul 04, 09:15

huh that did not take long for that to come out. thanks ego this rock

D_Zorro · Post by **D_Zorro** » Mon, 19. Jul 04, 09:28

Wow, just downloaded it, but i have a question, how can you check at what level your sector trader is ?? The old ways don't work no more.

DZorro,

Darkhold · Post by **Darkhold** » Mon, 19. Jul 04, 09:44

D_Zorro,

When you bring up your ship menu it will have the pilot's name followed by his level i.e. Jake (2)

On level 0 it's blank so just Jake

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 09:50

Just installed it and its running fine by the way.

Two quick questions though:

When i selected my Sector Trader (level 9)in Lucky Planets to start his Galaxy Trader command, i noticed that he had several different wares in his cargo (he was on level 9) the largest amount was Cahoona Meatsteaks, but this was explained by the fact he was in the middle of a trade run and sure enough he sold them, but this still left the other wares in his hold, will, when i upgrade him to a Galaxy Trader, he sell these remaining wares when he gets the oportunity or should i just eject them and start with a nice fresh empty hold.

The second question is that before i started my Galaxy Trader in another of my Sector Traders (also Level 9) in Home of Light, I commanded the ship to dock at the TerraCorp Headquarters to Fit him with the required Fight Software and to pick up a Jumpdrive whilst he was there, once all this was installed I started the Galaxy Trader command and .......nothing, he's just sitting there in the dock it says his command is "Standby" but he's been on standby for ages now, i even tried moving him out into space and issuing the Galaxy Trader Commandf again, but he just sat there in the same place and went to standby again!!!
What am i doing worng???

Brodie

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 10:07

Can anyone help me with my above post?

Lutzie · Post by **Lutzie** » Mon, 19. Jul 04, 10:10

Give people a chance, you only posted it 15 mins ago...

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 10:16

How about now?
Now?
How about now?...................................now?

Lol only messin, im playing the game now, so just thought i'd check to see if anyone had answered and found the thread had been pushed right the way down off the screen, so i thought i'd bump it back up, to increase the chance it'll get answered.

Post by **CBJ** » Mon, 19. Jul 04, 10:20

What happens to wares in the hold is explained in the first post in this thread.

If the trader is on standby he may be looking for a trade run or he may have a problem. Check the log, or if that doesn't work try switching on logging (also described in the first post in this thread).

Please do not bump threads up to the top. This is a very busy forum and if everyone bumped threads because they hadn't got an answer within a few minutes it would be utter chaos.

Brodie · Post by **Brodie** » Mon, 19. Jul 04, 11:26

I Said:

The second question is that before i started my Galaxy Trader in another of my Sector Traders (also Level 9) in Home of Light, I commanded the ship to dock at the TerraCorp Headquarters to Fit him with the required Fight Software and to pick up a Jumpdrive whilst he was there, once all this was installed I started the Galaxy Trader command and .......nothing, he's just sitting there in the dock it says his command is "Standby" but he's been on standby for ages now, i even tried moving him out into space and issuing the Galaxy Trader Commandf again, but he just sat there in the same place and went to standby again!!!
What am i doing worng???

CBJ Said:

If the trader is on standby he may be looking for a trade run or he may have a problem. Check the log, or if that doesn't work try switching on logging (also described in the first post in this thread).

Right CBJ I took your advice, I've checked the log and it does say whats wrong in fact it only says something like "Burniit and Mkess software, mk3 software trader.....name of trader...." thats it no message saying why he still isnt moving.

He has in his cargobay:

Trade Software Mk1, Mk2 and Mk3
Fight Software Mk1 and Mk2
Special Software Mk1
Navigational Software Mk1
Jumpdrive
Trading System Extension

He also has:

Argon Mercury with 100% hull
3 x 25mw sheilds
No weapons
100 Energy Cells in his hold
Fully maxed cargo hold, rudder and speed

Home base set to my M2 (which my other 2 Galaxy Traders both have also and they're running fine)

I just dont understand it, I have 2 other Galaxy Traders and they're both working, the only difference between the 2 working ones and this one is that they're both on level 10 and he's on 9.
Can anyone help????

Brodie

egosoft.com

egosoft.com

[BONUS Plug-In] Trade Command Software MK3