[SCRIPT] Salvage Network 2.8 [08.11.08]
Moderators: Scripting / Modding Moderators, Moderators for English X Forum
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
@[CMA]Radon
Hi,
You appear to be correct, thet server is reporting the file is not there, but I've just checked, and it is!
If you PM me and let me know your e-mail address, I'll e-mail you the file directly.
EDIT: The server (www.driveHQ.com) is down for maintenance for about 1 hour (apparently). The file should be available for download after the server is back online.
UPDATE: Server is back, file is now downloadable again!
Hi,
You appear to be correct, thet server is reporting the file is not there, but I've just checked, and it is!
If you PM me and let me know your e-mail address, I'll e-mail you the file directly.
EDIT: The server (www.driveHQ.com) is down for maintenance for about 1 hour (apparently). The file should be available for download after the server is back online.
UPDATE: Server is back, file is now downloadable again!
Last edited by TECSG on Fri, 19. Oct 07, 07:38, edited 1 time in total.
-
- Posts: 277
- Joined: Tue, 22. Aug 06, 22:33
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
@digdug83,
The two scripts *shouldn't* conflict, but it's not possible to guarantee that!
I'm not sure how/what Cycrow's script does, but the chances of anything major going wrong running both are small. if you backup your saves, your should be okay.
If there is a problem, you can always uninstall one of the scripts.
The two scripts *shouldn't* conflict, but it's not possible to guarantee that!
I'm not sure how/what Cycrow's script does, but the chances of anything major going wrong running both are small. if you backup your saves, your should be okay.
If there is a problem, you can always uninstall one of the scripts.
-
- Posts: 189
- Joined: Sun, 2. Mar 03, 18:59
Hi TECSG!
What I did was the following.
I got a BBS mission which offered me for 40000 + 7000 the automatic positioning of satellites.
When I accepted it I ran out of money afer 2 sats and got the message that no more sats will get deployed.
The deployment stoped but whenever I entered sector again with one of those sats I got a new one placed very close to the other (10m) . And yes it was every time I reentered. After 2 enters I had 3 sats.
Unfortunately I am not able to tell you exakt coords since I deleted the save game on accident.
I did also not find the command to force a stop of autodeployment. Would be great if anyone could provide me with a hint.
Thanks in advance and keep your great work
What I did was the following.
I got a BBS mission which offered me for 40000 + 7000 the automatic positioning of satellites.
When I accepted it I ran out of money afer 2 sats and got the message that no more sats will get deployed.
The deployment stoped but whenever I entered sector again with one of those sats I got a new one placed very close to the other (10m) . And yes it was every time I reentered. After 2 enters I had 3 sats.
Unfortunately I am not able to tell you exakt coords since I deleted the save game on accident.
I did also not find the command to force a stop of autodeployment. Would be great if anyone could provide me with a hint.
Thanks in advance and keep your great work
Last edited by Trokhon on Fri, 19. Oct 07, 18:51, edited 1 time in total.
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
Hi Trokhon,
Okay, thanks for the info, I'll check in to the deployment routine.
The Terminate routine for the Satellite deployment is used to clean up any Global variables prior to uninstalling the Salvage Network script, it's not meant to be run 'as is'.
If you do accidentally (or deliberately) run it, the script may not function properly until a load occurs (at which point the Setup script would be automatically run again).
Okay, thanks for the info, I'll check in to the deployment routine.
The Terminate routine for the Satellite deployment is used to clean up any Global variables prior to uninstalling the Salvage Network script, it's not meant to be run 'as is'.
If you do accidentally (or deliberately) run it, the script may not function properly until a load occurs (at which point the Setup script would be automatically run again).
-
- Posts: 189
- Joined: Sun, 2. Mar 03, 18:59
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
Hi Trokhon,
Sorry, there isn't one!
The network was designed to be totally self-sustaining. I did describe somewhere in this thread how to 'abort' the deployment, but I can't remember off-hand the exact steps, so you'll have to look through all comments!
EDIT: There is now (as of V2.8) a manual termination command!
Sorry, there isn't one!
The network was designed to be totally self-sustaining. I did describe somewhere in this thread how to 'abort' the deployment, but I can't remember off-hand the exact steps, so you'll have to look through all comments!
EDIT: There is now (as of V2.8) a manual termination command!
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
-
- Posts: 114
- Joined: Tue, 2. Dec 03, 16:05
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
Hi mrjingo,
I've put up new links:
http://tecsg.bravehost.com/salvagenetwork28.spk
http://www.drivehq.com/web/tecsg/salvagenetwork28.spk
http://hometown.aol.co.uk/NuHth6/X3_scr ... work28.spk
If those links are broken, PM me and I'll email you a copy directly.

I've put up new links:
http://tecsg.bravehost.com/salvagenetwork28.spk
http://www.drivehq.com/web/tecsg/salvagenetwork28.spk
http://hometown.aol.co.uk/NuHth6/X3_scr ... work28.spk
If those links are broken, PM me and I'll email you a copy directly.

Last edited by TECSG on Thu, 25. Oct 07, 01:24, edited 2 times in total.
-
- Posts: 1141
- Joined: Sun, 7. May 06, 03:53
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
-
- Posts: 65
- Joined: Sun, 6. Jun 04, 23:34
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
Hi lordsoulstrike,
Two possibilities come to mind, the file you downloaded may have corrupted, or Cycrow's Installer (which has recently had an update) may not be entirely backwards-compatible.
Try downloading the file again, and if it still doesn't work, make sure you have the latest version of Cycrow's installer (I have V2.12). If that also doesn't work, let me know and I'll send you a .ZIP file you can just extract into your X3 folder.
Two possibilities come to mind, the file you downloaded may have corrupted, or Cycrow's Installer (which has recently had an update) may not be entirely backwards-compatible.
Try downloading the file again, and if it still doesn't work, make sure you have the latest version of Cycrow's installer (I have V2.12). If that also doesn't work, let me know and I'll send you a .ZIP file you can just extract into your X3 folder.
-
- Posts: 65
- Joined: Sun, 6. Jun 04, 23:34
[quote="TECSG"]Hi lordsoulstrike,
Two possibilities come to mind, the file you downloaded may have corrupted, or Cycrow's Installer (which has recently had an update) may not be entirely backwards-compatible.
Try downloading the file again, and if it still doesn't work, make sure you have the latest version of Cycrow's installer (I have V2.12). If that also doesn't work, let me know and I'll send you a .ZIP file you can just extract into your X3 folder.[/quote]
Thanks for the offer. I did install the newest version and everything is fine now. Although I am running XTM .73 it will not totally work when I try and access the salvage network ingame. I guess I will have to wait until there is an update.
Thanks again
Two possibilities come to mind, the file you downloaded may have corrupted, or Cycrow's Installer (which has recently had an update) may not be entirely backwards-compatible.
Try downloading the file again, and if it still doesn't work, make sure you have the latest version of Cycrow's installer (I have V2.12). If that also doesn't work, let me know and I'll send you a .ZIP file you can just extract into your X3 folder.[/quote]
Thanks for the offer. I did install the newest version and everything is fine now. Although I am running XTM .73 it will not totally work when I try and access the salvage network ingame. I guess I will have to wait until there is an update.
Thanks again

-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06
-
- Posts: 65
- Joined: Sun, 6. Jun 04, 23:34
-
- Posts: 1610
- Joined: Tue, 17. Feb 04, 22:06