Hi . Just found out that there is a new game in the X3 universe haha . I am interested in this mod and the unoficial patch since they fix a lot of issues that linger from past games in the series. Is your mod compatible with the lastest unoficial patch 1.3.4 ? Thanks
Also I don't have a 07. files inmy addon2 folder....Should i rename the mod files from 08. to 07. ?
[MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy (23/04/2023)
Moderators: Moderators for English X Forum, Scripting / Modding Moderators, Moderators for the X3:FL Forums
-
unknown1
- Posts: 628
- Joined: Mon, 10. Dec 07, 12:12

-
-XeNoN-
- Posts: 373
- Joined: Tue, 6. Mar 12, 12:04

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy(1.3.2) version 1.2 (03/10/2022)
It should be compatible with 1.3.4 but havent tested it thoroughly tho, im waiting for 1.3.5 update since it will bring good amount of fixes and maybe some featuresunknown1 wrote: ↑Mon, 13. Feb 23, 22:01 Hi . Just found out that there is a new game in the X3 universe haha . I am interested in this mod and the unoficial patch since they fix a lot of issues that linger from past games in the series. Is your mod compatible with the lastest unoficial patch 1.3.4 ? Thanks
Also I don't have a 07. files inmy addon2 folder....Should i rename the mod files from 08. to 07. ?
And for file rename yes if you dont have 07 rename mod cat/dat to whatever highest number
Farnham's Legacy:
FLXRM
TES 5: Skyrim mods:
Skyrim Werewolf Overhaul - Bloodmoon Rising
X3TC/AP Mods
[Jobs] File For Cadius Shippack 2.01 (AP)
FLXRM
TES 5: Skyrim mods:
Skyrim Werewolf Overhaul - Bloodmoon Rising
X3TC/AP Mods
[Jobs] File For Cadius Shippack 2.01 (AP)
-
-XeNoN-
- Posts: 373
- Joined: Tue, 6. Mar 12, 12:04

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy(1.3.5) version 1.2a (07/04/2023)
Dear users,
since 1.3.5 has been released i've made a small compatibility patch that handles Deployable OWP's mod, so make sure you download it if you will use that mod along with 1.3.5, if you dont you can safely use 1.2 version
As always please report any bugs, suggestions you have
Thanks
since 1.3.5 has been released i've made a small compatibility patch that handles Deployable OWP's mod, so make sure you download it if you will use that mod along with 1.3.5, if you dont you can safely use 1.2 version
As always please report any bugs, suggestions you have
Thanks
Farnham's Legacy:
FLXRM
TES 5: Skyrim mods:
Skyrim Werewolf Overhaul - Bloodmoon Rising
X3TC/AP Mods
[Jobs] File For Cadius Shippack 2.01 (AP)
FLXRM
TES 5: Skyrim mods:
Skyrim Werewolf Overhaul - Bloodmoon Rising
X3TC/AP Mods
[Jobs] File For Cadius Shippack 2.01 (AP)
-
shinden
- Posts: 29
- Joined: Wed, 15. Aug 18, 13:52

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy(1.3.6 TC/AP plots compatible 0.7) version 1.2c (23/04/2023)
Hello XeNon,
I had a problem installing this. In the instructions, where I place the addon2/mov from XRM1.29 part 3 and delete 000044.pck...
first, theres was no 000044.pcx, there was 00044.pcx (one too many zero's)...I assumed this was a typo and deleted the file after placing a backup.
Also, I don't have as 00044.XML file, though from searching around, this file is extracted from 00044.pcx and provides the mark times for this...am I supposed to have a 00044.xml file? Should I extract it from the .pcx? Or was there something I was supposed to download? (I didn't care about the AP/TC plot movies, but I did add the patches)
This removed Betty from the game and all pilot sounds. Is this intentional?
I restored the file and it was working again. would leaving it in there cause a problem?
Thank you in advance
I had a problem installing this. In the instructions, where I place the addon2/mov from XRM1.29 part 3 and delete 000044.pck...
first, theres was no 000044.pcx, there was 00044.pcx (one too many zero's)...I assumed this was a typo and deleted the file after placing a backup.
Also, I don't have as 00044.XML file, though from searching around, this file is extracted from 00044.pcx and provides the mark times for this...am I supposed to have a 00044.xml file? Should I extract it from the .pcx? Or was there something I was supposed to download? (I didn't care about the AP/TC plot movies, but I did add the patches)
This removed Betty from the game and all pilot sounds. Is this intentional?
I restored the file and it was working again. would leaving it in there cause a problem?
Thank you in advance
-
shinden
- Posts: 29
- Joined: Wed, 15. Aug 18, 13:52

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy(1.3.6 TC/AP plots compatible 0.7) version 1.2c (23/04/2023)
Nevermind, I figured it out, the patches are incremental, and I only downloaded and installed 1.2
bad news is that I got through most of the FL plot that way. so gotta start over, but NBD.
bad news is that I got through most of the FL plot that way. so gotta start over, but NBD.
-
Phraggah
- Posts: 29
- Joined: Fri, 30. Mar 12, 05:54

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy(1.3.8 TC/AP plots compatible 0.99) version 1.2c (23/04/2023)
Does anyone have a new link to discord and part3? Discord appears expired and the onedrive link requires a microsoft account
-
-XeNoN-
- Posts: 373
- Joined: Tue, 6. Mar 12, 12:04

-
Muwulafraga
- Posts: 14
- Joined: Sun, 13. Aug 23, 15:26
-
Scoob
- Posts: 11494
- Joined: Thu, 27. Feb 03, 22:28

Re: [MOD] FLXRM - X3 Rebalance Mod for Farnham's Legacy (23/04/2023)
Hi,
I played this years ago and it was great. I fancied setting up a new game. However, I had some issues and I suspect it's down to my use of the latest version of the Unofficial Patch - v1.3.18 - it looks like this was only compatible up to v1.3.5. I no longer have that version of the Unofficial Patch, I'm looking, but haven't found it yet...
I did some testing with JUST FLXRM installed - manually of course - alongside the Plugin Manager and the latest Unofficial Patch. When I press "d" to interact with a station, game will instantly CTD.
Just hoping someone can offer some assistance, as I'd love to use the updated XRM mod for Farnham's Legacy.
I'm still tinkering, so if I find any more information, I'll be sure to post back.
Edit: Update. It seems I was falling foul of a corrupted download. As a last resort, I deleted everything and re-downloaded. I'm not crashing any more. However, I do get told about "fish" when I dock, not a clue what that's about.
I played this years ago and it was great. I fancied setting up a new game. However, I had some issues and I suspect it's down to my use of the latest version of the Unofficial Patch - v1.3.18 - it looks like this was only compatible up to v1.3.5. I no longer have that version of the Unofficial Patch, I'm looking, but haven't found it yet...
I did some testing with JUST FLXRM installed - manually of course - alongside the Plugin Manager and the latest Unofficial Patch. When I press "d" to interact with a station, game will instantly CTD.
Just hoping someone can offer some assistance, as I'd love to use the updated XRM mod for Farnham's Legacy.
I'm still tinkering, so if I find any more information, I'll be sure to post back.
Edit: Update. It seems I was falling foul of a corrupted download. As a last resort, I deleted everything and re-downloaded. I'm not crashing any more. However, I do get told about "fish" when I dock, not a clue what that's about.
