[Scripts] Apricot Mapping Service Scripts, MD and mini-mods [APv2.5.1/TCv3]

The place to discuss scripting and game modifications for X³: Terran Conflict and X³: Albion Prelude.

Moderators: Moderators for English X Forum, Scripting / Modding Moderators

Post Reply
User avatar
Krewzur
Posts: 725
Joined: Mon, 16. Jun 08, 20:14
x4

Post by Krewzur » Fri, 19. Dec 08, 23:09

Is it possible to have a script that teleports a ship from one ships hanger to another ships hanger??

EG:
An M1/TL has a fighter docked, that M1/TL can teleport that fighter to another M1/TL within a certain range.

Can it be done???
Corsair 400c // Intel i7 8700k // H100i v2 // ASUS Maximus X Code // ASUS 1080ti Strix OC // 2x8GB Corsair Vengeance 3200MHz // Samsung 960 Evo 250GB // 960GB SanDisk Ultra II // Corsair RM850i

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Fri, 19. Dec 08, 23:20

It used to do that in TCR. But I noticed that it didnt when I was testing it.

Its seems it has to be beamed out into space first then beamed into the other ship. Must have been a change to the commands used.

You can beam from a station straight into a ship.

Mind you, I cant get the beam out into space to work for a TM, on anything bigger than a fighter. I did get it to beam from the TM into a M1 and then out into space. So there is definitely something odd going on that it works ship to ship from the TM and not into space, where its the opposite for all other ships. Must be something specific about how they coded the TM's. Watching a ship dock in TM's is weird since they dont have enough space to actually take the docking ship internally.

User avatar
Krewzur
Posts: 725
Joined: Mon, 16. Jun 08, 20:14
x4

Post by Krewzur » Sun, 21. Dec 08, 21:45

why is there "apricot modified bullets" in my game :?

also "apricot modified ppc" and some others?
Corsair 400c // Intel i7 8700k // H100i v2 // ASUS Maximus X Code // ASUS 1080ti Strix OC // 2x8GB Corsair Vengeance 3200MHz // Samsung 960 Evo 250GB // 960GB SanDisk Ultra II // Corsair RM850i

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Mon, 22. Dec 08, 00:30

The bullets is a mistake. I changed something I shouldnt have as it turned out. That will be rectified shortly. For now, read "Unknown Object". I only discovered this yesterday and havent had a chance yet to change if back.

The guns are there because I made them for my mod. I use a single master language file, so stuff in the mod, will also be available to the script editor if you use the stand alone scripts.

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Mon, 22. Dec 08, 10:51

I've upgraded the scripts spks to remove that apricot bullets issue.

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Tue, 23. Dec 08, 07:09

Added a very easy version of the HUB plot.

StratonAce
Posts: 72
Joined: Mon, 22. Jan 07, 00:13
x3

Post by StratonAce » Thu, 25. Dec 08, 06:54

Hey apricotslice, I cannot seem to download "ST/UT for most ship types". I can download the others just fine, but the "ST/UT for most ship types" gives me a Not Found error.[/b]

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Thu, 25. Dec 08, 07:16

Oops, I changed the download directory to the new mirror site, and forgot to upload that script to it. :oops:

Sorry. Try now.

StratonAce
Posts: 72
Joined: Mon, 22. Jan 07, 00:13
x3

Post by StratonAce » Thu, 25. Dec 08, 07:20

That did it. Thanks, apricotslice. :D

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Thu, 25. Dec 08, 07:28

Give me some feedback on it, as I really havent tied it myself yet.

One thing that is different in TC is that M7's cant dock at stations, so it wont make much of a UT anymore.

StratonAce
Posts: 72
Joined: Mon, 22. Jan 07, 00:13
x3

Post by StratonAce » Thu, 25. Dec 08, 08:00

Will do. I plan on having a TC marathon over the holiday weekend. ;)

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Sat, 27. Dec 08, 00:06

aikjo2 wrote:For some reason I can't find the CBeam command...
I have ABeam, it is under the "General" menu, but CBeam will not show up for the life of me, any ideas whats up?
What other scripts are you running ? Likely there is a conflict with another script.

Also, dont use the menu, assign a hotkey, its quicker to use.

strude
Posts: 1471
Joined: Wed, 3. Aug 05, 08:15
x4

Post by strude » Sat, 27. Dec 08, 02:54

I installed the Abeam/Cbeam/Dbeam script, but don't see any new hotkeys to set? I just figured it was menu driven only as I didn't see anything in the first post about hotkeys, but I did think it was odd there was none. Any ideas why they wouldn't be showing up? The setup and function scripts are in the scripts directory, and the 8686 file is in the t directory.
Gaming PC: Gigabyte H270M-D3H | i7 7700 | 16Gb DDR4 | Gigabyte GTX1060 6Gb OC | Asus Xonar DGX | Window 10 Home 64bit | Samsung 256Gb SSD

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Sat, 27. Dec 08, 03:52

Umm, no idea why they wouldnt be showing up. Are you sure your looking in the right place ?

strude
Posts: 1471
Joined: Wed, 3. Aug 05, 08:15
x4

Post by strude » Sat, 27. Dec 08, 04:29

Nope, can't be sure, but I have set and created hot keys before in X3:R, and I have the MARS system installed and can see those hot keys. I'll have another look just to be sure. I also have the community plugin configuration script install and i don't recall seeing a hot key for that either. Would rerunning the setup scripts be of any use? The scripts I use are
  • Commercial agent 3.1.03
    Command Queuing 1.1
    Community Plugin Config 1.1
    MARS 4.05
    Salvage Calim Software 1.00
    Ship Killed Notification 1.0.3
    Jump Drive Kits 1.5
    Cbeam 1
The script installer has been having some issues of late, so it might be related to that. I'll rummage around an see what I can find.
Gaming PC: Gigabyte H270M-D3H | i7 7700 | 16Gb DDR4 | Gigabyte GTX1060 6Gb OC | Asus Xonar DGX | Window 10 Home 64bit | Samsung 256Gb SSD

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Sat, 27. Dec 08, 04:31

Salvage claim should have a hotkey, and the cbeam hotkey should be in the same place.

strude
Posts: 1471
Joined: Wed, 3. Aug 05, 08:15
x4

Post by strude » Sat, 27. Dec 08, 08:15

I finally found some additional scripts that Cycrow has released that managed to get the hotkey for the SCS working. It wasn't there before. These can be found in the SCS thread here and it seems these need to be copied into the scripts folder each time the script installer is exited. However, it didn't help the hotkeys for the beam functions in the same location. I looked at the setup script and there is a call to a script plugin.hotkeymanager.somethingorother, which has a lot of ??? before parameters. I don't have a plugin.hoykeymanager.something script in the scripts folder. Is there a prereq that I'm supposed to have, or possibly this script is supposed to be supplied by the script installer and isn't being?

EDIT: Probably should also mention that while I have been trying to get the hotkeys working I've removed all the other scripts that I listed before. Only the EMP mod, SCS script and the beam scripts are currently running. Therefore if the prereq that I'm missing is in one of those other scripts, I'm probably missing it.
Gaming PC: Gigabyte H270M-D3H | i7 7700 | 16Gb DDR4 | Gigabyte GTX1060 6Gb OC | Asus Xonar DGX | Window 10 Home 64bit | Samsung 256Gb SSD

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Sat, 27. Dec 08, 08:22

Erk. :oops: :o :cry:

I forgot.

There will be a slight pause......

User avatar
apricotslice
Posts: 14129
Joined: Sun, 16. May 04, 13:01
x4

Post by apricotslice » Sat, 27. Dec 08, 08:47

Ok, download the new files and try again.

I was having trouble with the hotkeys and changed to use cycrows hotkeymanager, but forgot to package his files. :oops:

strude
Posts: 1471
Joined: Wed, 3. Aug 05, 08:15
x4

Post by strude » Sun, 28. Dec 08, 01:27

Thanks for that. I actually used the extra search and found the hotkey manager scripts, which worked anyway. But it will certainly be good for others to have them packaged together
Gaming PC: Gigabyte H270M-D3H | i7 7700 | 16Gb DDR4 | Gigabyte GTX1060 6Gb OC | Asus Xonar DGX | Window 10 Home 64bit | Samsung 256Gb SSD

Post Reply

Return to “X³: Terran Conflict / Albion Prelude - Scripts and Modding”