[SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
-
- Posts: 6
- Joined: Tue, 31. Oct 17, 17:44
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Any chance the new Litcube compatible version will work with the Star Wars Litcube mod?
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hi vanguardian1,
Not at the minute unfortunately, I contacted litcube about his mod but he has not responded.
Should I hear back, I will update this thread though.
Not at the minute unfortunately, I contacted litcube about his mod but he has not responded.
Should I hear back, I will update this thread though.
-
- Posts: 6
- Joined: Tue, 31. Oct 17, 17:44
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
I noticed you mentioned a problem with the wares distribution, and I know the Turbo mod is part of the Star Wars Litcube mod by XenonArchitect7, maybe he would know about this issue? FYI, I tracked down this mod (Version 4.11 beta?) to my SWLU large ship battle lock-ups, but I'm hoping to use it again, if even the basic scanner version is still so much better than the satellite monitoring mod.
Also, how about making each part of the mod togglable, with a default off state for maximum compatibility with other mods? Just an idea (that may or may not help, but I'm trying!).
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hi vanguardian1,
The two main problems were that after I installed the latest LU version (1.7.2 I think) my SCS ware would not show up, it looked like the LU mod had 'nuked' all the wares it was not using. My ware was just showing up as 'Unused' in the wares list.
Also, my mod used some of the internal X-ships that the LU mod replaced and there were no alternative new ships that could (for example) carry a Repair Laser as used by the NPC Salvage Repair ships and Debris Salvagers.
I've not seen the Star Wars mod yet, unfortunately too much IRL at the minute!
It is a good idea to make some of the parts 'toggleable', but given there are around 80 commands in the version I have (5.01), it would require far too much work to go through all the commands/routines to implement that.
The two main problems were that after I installed the latest LU version (1.7.2 I think) my SCS ware would not show up, it looked like the LU mod had 'nuked' all the wares it was not using. My ware was just showing up as 'Unused' in the wares list.
Also, my mod used some of the internal X-ships that the LU mod replaced and there were no alternative new ships that could (for example) carry a Repair Laser as used by the NPC Salvage Repair ships and Debris Salvagers.
I've not seen the Star Wars mod yet, unfortunately too much IRL at the minute!
It is a good idea to make some of the parts 'toggleable', but given there are around 80 commands in the version I have (5.01), it would require far too much work to go through all the commands/routines to implement that.
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hello and thankyou for that script i loved it and used it on AP!
But now i ask that can you make it work on FL ... Please!
I mean SPK for new version of Plugin Mananger.
But now i ask that can you make it work on FL ... Please!
I mean SPK for new version of Plugin Mananger.
And one day ... one day i will be there ...
And if not... then i will be here ...
Me
And if not... then i will be here ...
Me
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
HI milytar,
Glad you like the script!
I will have a look at the new expansion and see what the differences are between that and X3/AP, if they are not too different, it should be possible to port the SCS scripts to FL.
If the engine is the same, you should be able to install the scripts immediately, but if (like LU) some of the ships have been modified in the game, there may be some issues.
Hm, didn't know there was a new version of Cycrow's Plugin Manager, I'll have a look at that too!
Will post an update when I know more about FL compatibility.
Quick Update:
Have just checked some of the FL scripts, the 2 in-game scripts that SCS modifies for the Stealth Satellites now contains some FL specific commands so none of the editors I have can edit them (Exscriptor or X-Studio). Until either of those is updated to support FL, the SCS scripts won't fully work.
Glad you like the script!
I will have a look at the new expansion and see what the differences are between that and X3/AP, if they are not too different, it should be possible to port the SCS scripts to FL.
If the engine is the same, you should be able to install the scripts immediately, but if (like LU) some of the ships have been modified in the game, there may be some issues.
Hm, didn't know there was a new version of Cycrow's Plugin Manager, I'll have a look at that too!
Will post an update when I know more about FL compatibility.
Quick Update:
Have just checked some of the FL scripts, the 2 in-game scripts that SCS modifies for the Stealth Satellites now contains some FL specific commands so none of the editors I have can edit them (Exscriptor or X-Studio). Until either of those is updated to support FL, the SCS scripts won't fully work.
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
I thankyou you for the answer and i wait till you make some adjustments or make something new and interesting
Anyway good luck and prosper to your modding endevour!
PS!Im not native english speaker so exquse my poor language skills!
Anyway good luck and prosper to your modding endevour!
PS!Im not native english speaker so exquse my poor language skills!
And one day ... one day i will be there ...
And if not... then i will be here ...
Me
And if not... then i will be here ...
Me
- X2-Illuminatus
- Moderator (Deutsch)
- Posts: 24962
- Joined: Sun, 2. Apr 06, 16:38
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
There's an unofficial update for X-Studio by Deniskos.TECSG wrote: ↑Wed, 19. May 21, 16:12Have just checked some of the FL scripts, the 2 in-game scripts that SCS modifies for the Stealth Satellites now contains some FL specific commands so none of the editors I have can edit them (Exscriptor or X-Studio). Until either of those is updated to support FL, the SCS scripts won't fully work.
Nun verfügbar! X3: Farnham's Legacy - Ein neues Kapitel für einen alten Favoriten
Die komplette X-Roman-Reihe jetzt als Kindle E-Books! (Farnhams Legende, Nopileos, X3: Yoshiko, X3: Hüter der Tore, X3: Wächter der Erde)
Neuauflage der fünf X-Romane als Taschenbuch
The official X-novels Farnham's Legend, Nopileos, X3: Yoshiko as Kindle e-books!
Die komplette X-Roman-Reihe jetzt als Kindle E-Books! (Farnhams Legende, Nopileos, X3: Yoshiko, X3: Hüter der Tore, X3: Wächter der Erde)
Neuauflage der fünf X-Romane als Taschenbuch
The official X-novels Farnham's Legend, Nopileos, X3: Yoshiko as Kindle e-books!
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Thanks, I'll check it out.
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hello, I heard you had updated the V5 version of this mod to work with Litcube's mod, but I also heard that you had problems with the wares, is that the reason why you didn't post it? Or I'm dumb and I'm not seeing it? I don't mind testing it myself, since I would love to have this script, but I also don't know how much I can help, since I don't know too much about scripts and stuff
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hi Koumi,
In the latest version of Litcube's mod (1.7.2 I think) , my wares (and several others) appear as 'unused'. Additionally, I can't find any of the ships that support Repair Laser as well as a number of wares like the Camera Drone being replaced/removed also. so there are a number of issues.
On top of that a bug in the X-Studio editor corrupted a load of the SC script files, so I'm in the process of rebuilding/testing everything!
A fair amount to work has gone in to adding support for LU and other mods, but it is still ongoing at the minute.
In the latest version of Litcube's mod (1.7.2 I think) , my wares (and several others) appear as 'unused'. Additionally, I can't find any of the ships that support Repair Laser as well as a number of wares like the Camera Drone being replaced/removed also. so there are a number of issues.
On top of that a bug in the X-Studio editor corrupted a load of the SC script files, so I'm in the process of rebuilding/testing everything!
A fair amount to work has gone in to adding support for LU and other mods, but it is still ongoing at the minute.
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
I understand, also please don't feel pressured or anything, I can't express myself very well in english
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hi Koumi,
No problem. You're doing fine!
No problem. You're doing fine!
-
- Posts: 117
- Joined: Sun, 22. Mar 09, 15:07
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
anyone confirmed which commands are or are not working and if any of the rest are game breaking?
“One has to understand what the enemy is all about: the enemy's history, the enemy's culture, the enemy's aspirations. If you understand these well, you can perhaps move towards peace.”
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Hi hairyhermit,
Most of the commands work with LU, it's just that many of the ships/wares were removed/replaced in that mod which can cause some problems or stop features working.
For example, the camera drones have been removed, so the camera drone commands will not be able to use that ware/ship.
Also most (if not all) of the ships have had the Repair Laser option removed, so the Salvage Debris command will work, but will not show the ships firing the Repair Laser at the debris (will possibly default to another laser?)
The Stealth Satellites script modifies an in-game script (ie, one written by Egosoft) and I think LU modifies the same script, so whichever is installed last will work. My script can detect if the Stealth modification is active though.
Worst of all, the Experimental Shuttle was removed in LU, so the XPS missions will give a different ship as the 'prize', not sure which one that is as I can't get the LU mod to work.
Most of the commands work with LU, it's just that many of the ships/wares were removed/replaced in that mod which can cause some problems or stop features working.
For example, the camera drones have been removed, so the camera drone commands will not be able to use that ware/ship.
Also most (if not all) of the ships have had the Repair Laser option removed, so the Salvage Debris command will work, but will not show the ships firing the Repair Laser at the debris (will possibly default to another laser?)
The Stealth Satellites script modifies an in-game script (ie, one written by Egosoft) and I think LU modifies the same script, so whichever is installed last will work. My script can detect if the Stealth modification is active though.
Worst of all, the Experimental Shuttle was removed in LU, so the XPS missions will give a different ship as the 'prize', not sure which one that is as I can't get the LU mod to work.
-
- Posts: 295
- Joined: Fri, 20. Mar 09, 16:38
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Uploaded Pind changes to xdownloads : https://xdownloads.co.uk/index.php?opti ... Itemid=116
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Er, thanks?
What is this?
What is this?
-
- Posts: 295
- Joined: Fri, 20. Mar 09, 16:38
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
oh, i posted in the wrong thread , sorry.
Re: [SCRIPT] Salvage Command Suite V4.11 [29/12/2012]
Phew! Cool.
Thought I'd missed something there!
Thanks for the update.
Thought I'd missed something there!
Thanks for the update.
When trying to install this in the script folder, it worryingly wants to replace files. I decided not to, because it will probably break my game.
Things I have installed:
XRM
No gates rep loss
Pirate and Yaki ranking
Bounce
Do you think it will be safe? How do I know what I can overwrite? Why are they overwriting in the first place?
Things I have installed:
XRM
No gates rep loss
Pirate and Yaki ranking
Bounce
Do you think it will be safe? How do I know what I can overwrite? Why are they overwriting in the first place?