PHQ Design - Boron based Wharf - Self sufficient

Forum for sharing construction plans and loadouts.

Moderators: Moderators for English X Forum, Scripting / Modding Moderators

Post Reply
User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Wed, 16. Aug 23, 16:32

Its as self sufficient as it can be, needs about 6 L miners (2 Gas, 4 Minerals), and maybe a couple of L traders.
Oh also you will need lots of Blueprints for Boron station building modules like the big Hex docking module for L/XL traders, and S/M ships/thrusters/weapons/etcetera

Goal with this was to see if a mostly Boron parts PHQ could be :
a) More game performance friendly than my old one
b) Less of a problem for ships landing/taking off

On my laptop, both goals have been achieved. And being a Wharf its a bit of a money spinner (which will also be a good base for terraforming later on).

It has two Wharfs, one is the normal S/M Fabrication, the other is a Boron S/M Fabrication.
To make the station more Boron looking just remove the normal one.

Expected operating budget is circa 230 million.

I find its now pretty well balanced for Work force needs (and the Bofu/Meds). It also overproduces a little on each resource needed .. maybe needs a bit of tweaking in some areas, have a look at the logical overview when a module is in full flow of Production/Consumption (usually best time is just after a heap of ships have been churned out the Fabrication bays).
It also has 9 Boron disc defence modules, kitted out with Boron weapons/shields, and situated around the outside of the station so as to reduce the occurance of firing through its own modules ( I know it doesnt do any harm, its just a visually annoying thing to me :) )

The only bad thing is you cant have it entirely Boron, Antimatter Converters etcetera are all the usual standard style, but I placed them all over the place so they are kind of watered down by the station structures style they are appended to.

There are some good places left to expand it if anyone needs to.
.
.
Video ..
https://youtu.be/0RxYQHV8iGM
.
.
Untitled3.png
.
Untitled2.png
.
Untitled1.png
.
Untitled4.png
.
.
I think Boso Ta will be a happy squid on this station now :boron:
I mean hes never going to move, so I made his pad better.

Needs :
10x10x10 Plot.
Station Manager.
Ship dealer.
Build drones (set in the Logical overview)
Good L sized miners (5-6 Gas, 7-9 Mineral .. Depends how close to resources your PHQ is)

Edit : Its Loadout is set to custom too, so that the station manager doesn't go randomly adding loads of additional turrets to storage modules etcetera, reducing game performance, and increasing the eyesore of the station shooting through its own modules.

The station was constructed with game version 6.20 beta installed. And overlaps were not allowed.

Edit 2 : This is the latest version (see posts below for notes on changes since the first version)
.
Boron Headquarters.xml
(115.27 KiB) Downloaded 235 times
Last edited by alt3rn1ty on Fri, 22. Sep 23, 09:15, edited 5 times in total.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Wed, 16. Aug 23, 19:00

Just modified it a bit, wasn't happy with the standard S/M Fabrication module being included so it now has two Boron S/M Fabrications instead ..
.
.
Untitled1.png
.
.
Production line running ..
.
Untitled.png
.
.
Workforce and resources needed ..
.
Untitled.png
.
.
Edit : Since posting this I have added a Casino .. Not going to re-upload because I think you have to acquire that from somewhere and I cant remember where :)
But also note the build as uploaded already has a Gambling Den, so if you still need to acquire that you are going to need it.
Last edited by alt3rn1ty on Thu, 21. Sep 23, 14:26, edited 1 time in total.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

ZeroBoogie
Posts: 52
Joined: Tue, 22. Nov 05, 02:44
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by ZeroBoogie » Thu, 17. Aug 23, 04:02

Thank you, it looks cool

User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Thu, 17. Aug 23, 10:43

Thank you :)
I wish I could get it more Boron looking instead of a Frankenstein monster of generic modules bolted on, but we can only work with what we have available.
It achieves the aims anyway.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

ZeroBoogie
Posts: 52
Joined: Tue, 22. Nov 05, 02:44
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by ZeroBoogie » Fri, 18. Aug 23, 04:38

No worries you did very good

User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Fri, 18. Aug 23, 12:47

I just decided to tweak mine a bit (not going to re-upload, because you guys may want to do your own thing)

Its always running a bit short on Weapon Components, so added ..

2 x Boron Large Habitat
1 x Bofu production
1 x Med production
4 x Weapon component production (taking it up to 7 in total)

The workforce and food/meds needed increasing for the extra Weapon component modules.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Wed, 23. Aug 23, 15:25

After longer running decided it also needed more Advanced electronics modules, I took them also to 7 in total.
I think I also added 1 x Bofu and 1 x Meds plus another L Habitat .. or two, cant remember.

Going to stop there because before long I will be bordering on ruining one of the objectives and make it less and less performance friendly.

The station shores up any further needs with other faction traders anyway. Some of you guys will probably have beastly machines you can expand it to death with production and make it far more self sufficient, but for me this will do now.
Hull parts might need a bit of attention.

I think there is a station calculator somewhere noted in this forum (although it may not have Boron modules yet, idk), but I didn't use one, I just used the Logical Overview and judged the production versus consumption by observation over time for each resource. Its allowing me to kick off buying fleets of Rays to fend off Xenons early game expansion anyway :).

Edit : One more thing .. It doesn't need so many solar panels, I have since removed 4 of them (two from each side). Being located in Path to Profit it was really over-producing E Cells (even after all my tweaking since uploading it). Maybe needs them in a sector with less sunlight.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

User avatar
alt3rn1ty
Posts: 2399
Joined: Thu, 26. Jan 06, 19:45
x4

Re: PHQ Design - Boron based Wharf - Self sufficient

Post by alt3rn1ty » Tue, 12. Sep 23, 21:22

I'm uploading my latest changes, MKII ..
Untitled.png
.. But be warned its quite a change from previous, although it looks similar I did an overhaul which involved taking out quite a bit of it, before putting it mostly back again. So if you rebuild from this one, expect half the station to be removed before it is rebuilt.

Reason : The 4 x M 14 x S docks, were not ideally placed for landing / taking off. X4 engine could still get you stuck and being thrown out of parts of the station randomly. And why the heck did I put two of them in there .. I dont know :)

The one remaining 4M14S dock is now situated above the HQ Rock, and its upside down. If you land an M class ship on there .. Look up, and you will see most of the station, erm, below you.
Untitled2.png
It also doesn't need two S/M Fabrications, so reduced that to just one aswell.

And the Gambling Den plus Casino are now near the end of the build chain, previously the Gambling Den was probably one of the first modules added, which meant if anyone did not want it it would have been a major rebuild to get rid of it.

And after much tweaking I think I have the balance of resources / workforce just right, its also doing well in my game with the first part of terraforming for the SCA right now (reducing Radioactivity).

I think I forgot to mention this needs a plot 10x10x10

I currently have 14 miners working for the station, 3 x Rorqual Gas, and 11 Wyvern Mineral - They all do pretty well at supplying everything the station needs and stand their own against bothersome Kha'ak.

Anyone new to stations, you will also need to recruit a Station Manager, and a Ship Dealer.
And when its built check out the "Logical Overview", and select how many Drones the station should have for cargo transfers, building ships and making repairs, maybe also some defence drones .. up to you.

With MKII I also added a few more Boron Defence disks, they have all been edited to have a full compliment of turrets.

Blueprints : You are going to need everything Boron, all S/M ships / Weapons / Turrets etcetera etcetera, and all the standard / shared production modules.
Beyond those, well anything S/M from all other factions .. But beware buying anything Terran if you dont want to add in Microlattice / Silicon carbide / Computronic substrate production.

MKII has quite a few more modules than the first one I uploaded, but on my laptop I am getting FPS between 50-68 (depends where you are on the station), so compaired with my previous playthrough this self sufficient PHQ Wharf is far better, on my old PHQ it used to be a range of 35-50.
I'm pretty sure Boron stations are a bit more optimal, though they look more complicated models <shrugs>

Edit : Here's a new version - Download is in the first post of this topic.

Its MKII again but the Boron 4M14S dock has been replaced with 2 x 3M6S Luxury docks - Reason; The docks are a bit higher so you see more of the station "below" you, and as much as I love all things Boron, I changed to 3M6S Luxury dock because there are no enclosed S docks. Landing and taking off from enclosed docks in X4 is 90% friggin annoying as you either jiggle at the entrance for ages or the game just fly's you through bulkheads. In testing landing an S ship at the old upside down enclosed docks the games autopilot (me standing in the cockpit while my pilot flew the ship), there were a few times when the ship approached the dock from above the upside down dock, and then proceeded straight through the bottom of the dock, sigh!.

With this version you should get less instances of such problems, hopefully. And you can obviously now use S ships aswell as M ships to land if you want the upside down view of the station. And if the games autopilot decides to land at the enclosed S/M Fabrication docks instead as it sometimes does, just transport to the Traders on the luxury docks :) ..
.
Untitled3.png
.
This new build is also a bit more optimal, I realised while doing the Boron Shipyard Construction Plan that Boron L Storage modules have 6 connection points, 1 at the top 1 at the bottom and 4 more near the top.
Its as long as a Boron Vertical connector No.2.
And can also act as one of those small cross connectors.

By using the Boron Storage modules to replace most vertical and cross connectors, I reduced the overall build count of modules.

The download in the first post is the newest build.
Laptop Dell G15 5510 : Win 11 x64
CPU - 10th Gen' Core I7 10870H 2.2-5.0ghz, GPU - NVidia Geforce RTX 3060, VRAM 6gb GDDR5,
RAM - 32gb (2x16gb, Dual Channel mode set in BIOS) DDR4 2933mhz Kingston Fury Impact,
SSD - Kioxia M.2 NVME 512gb (System), + Samsung M.2 NVME 970 Evo Plus 1tb (Games)

:boron: Long live Queen Polypheides and may her tentacles always be supple.
Seeker of Sohnen.

Post Reply

Return to “Construction Community”