Linux Support

[Unbekanntes Feindschiff]

I know my version is not officially supported, but maybe this is a more common problem.

[...]

Starting the game works fine, it seems to do its thing... and then EVERYTHING simply hangs. Can't even access tty2. But the music keeps playing
I managed to get to the main menu ONCE, thought I could change the AA settings and whatnot before starting a new game and ended up with the same problem.

As mentioned in the main post, I already tried waiting for about 20 minutes in hope it comes back... but nope.

A more verbose log could help maybe? How would I obtain that? Or am I simply missing some dependency?

I have had that happen once when I ran out of memory (as X4 is fairly memory-hungry) Maybe try closing things like web browsers (which are enormously memory-hungry these days) before running the game.

[Brianetta]

I'm seeing a lot more bloom/glow in white objects (such as the transport room door in my ship) on Linux than I experience in Windows.

[cicero111]

Seems like there are some issues with mods using folders with upper case characters (tested with extensions folder in game directory). Example are the NoSuperHighway mod, renaming the 2 folders "NoSuperHighway/maps/XU_ep2_universe" to "nosuperhighway/maps/xu_ep2_universe" makes it work OK.
My game are installed on a ext4 filesystem.

Otherwise, seems to work great so far. Not tested large balltes etc yet but seems on par or better than Windows (so glad i dont have to boot that thing again so probably "a bit" subjective, but hey). Using a Nvidia GTX780, 418.43 driver. Thank you so much for the port - this is just excellent

[hogy]

I was just exploring the equipment dock that you start in, and ended up trying to transport into a ship that was docked, to the dock area I think. I went to walk out of the door, and almost immediately the mouse stopped responding and I couldn't look around or move. I saved the game (see below), and when loaded it seems to be stuck underneath a landing pad of some sort, where I can move around, but jumping from where its saved makes the controls stop responding again. The whole thing starts flying off, and Ctrl+D seems to go to the bridge where ship is flying, so perhaps it was some race condition when going to a craft that is leaving?

Here's the save game:
https://www.dropbox.com/s/ig3fvt88evpdu ... ml.gz?dl=0

I have no idea if this is Linux specific (or if this should be reported on this thread or another). If the save game isn't helpful to figure out what happened, it'd probably require me to use the previous save game, and wait for the ship to dock again, which I can maybe try if its helpful.

Other minor things:
- Setting up the controls was a bit of a pain. E.g. how do I clear a binding? If I click a binding, the cursor appears there, but won't go unless I press a button to assign, even when clicking other bindings or controls.
- I tried the ship modes tutorial after the previous tutorials (the flight one just seemed to stop afterwards without completing the tutorial). It said about how to abort the tutorial, but just seemed to stop there without any more text showing. Perhaps I need to try that again afresh.

[major_bird]

Just FYI.

Game is working fine so far. I am on debian testing. AMD RX 480 + default mesa.
Some minor bugs, but nothing important and i am too lazy right know to check the other posts if they were already reported.
Thanks for making a native linux version!

[radcapricorn]

Um, what is up with the UI?



Antialiasing does smooth those out a bit, but... eh?

The mouse pointer also looks ugly as hell, but it's not being captured by the screenshot :\

[radcapricorn]

Mission to nowhere?

I've taken a mission to deploy a satellite. The guidance pointed to an Inactive Jumpgate. A few minutes later, the mission completed on its own.

Save after taking the mission: https://dl.dropbox.com/s/75rbkxbtgcl49h ... 010.xml.gz

[StarTuxia]

Only played an hour. Not got my joysticks to see the axis, but buttons work.

Everything else seems fine within that hour on Slackware, running I7-8700, 16GB RAM and an Nivdia 2070 8GB vram. On ultra at 60FPS.

[radcapricorn]

- Setting up the controls was a bit of a pain. E.g. how do I clear a binding? If I click a binding, the cursor appears there, but won't go unless I press a button to assign, even when clicking other bindings or controls.

Press Delete after clicking a binding.

[CBJ]

Um, what is up with the UI?

That is not specific to the Linux version; it happens in Windows too. We're aware of it and it will get looked at when more urgent issues have been dealt with.

[radcapricorn]

Um, what is up with the UI?

That is not specific to the Linux version; it happens in Windows too. We're aware of it and it will get looked at when more urgent issues have been dealt with.

Good to know, thanks. And the mouse pointer? I do remember it not looking that ugly from trying to run under Proton. It is as if whatever transparency mask it has gets clamped instead of blended, resulting in an ugly pixelated black outline. This is for all the pointers I've seen so far.

[tuxinvader]

X4 Linux Beta! Kerching! <insert cash register emoji here>

Q: When is FTTC (Fibre to the cabinet) broadband not fast enough?
A: When you're waiting for X4 to complete downloading.... 10 mins and counting.

Thank you Egosoft!

[apcolvin]

I managed to get some extra logs for the lock up from the dmesg. The screen and keyboard attached to X is dead but the server is responding to SSH logins. Here is the error
Note that I have also update the vulkan and AMDGPU versions which brought along LLVM7.0.1

[ 3096.841674] amdgpu 0000:03:00.0: [gfxhub] VMC page fault (src_id:0 ring:158 vmid:2 pasid:32800, for process Main() pid 26321 thread Main() pid 26321)
[ 3096.841675] amdgpu 0000:03:00.0: in page starting at address 0x000000000174b000 from 27
[ 3096.841676] amdgpu 0000:03:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
[ 3107.008511] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=114395, emitted seq=114397

[segmentationfault]

so I don't have worries with X4.
You had a bug tracker in use for X:R testing, I assume it is not making a return this time?

I have worries;p There's always reasons to worry, and it's not called a "beta" just for coolness factor;)
But hopefully it all goes reasonably well:)

Regarding the bug tracker: "we'll see".

After testing it about 8 hours I have to say I'm more than happy to its current state . I found couple of bugs (I sent a bug report by email) but otherwise the game has been totally playable for me. Thanks.

[equeim]

I managed to get some extra logs for the lock up from the dmesg. The screen and keyboard attached to X is dead but the server is responding to SSH logins. Here is the error
Note that I have also update the vulkan and AMDGPU versions which brought along LLVM7.0.1

[ 3096.841674] amdgpu 0000:03:00.0: [gfxhub] VMC page fault (src_id:0 ring:158 vmid:2 pasid:32800, for process Main() pid 26321 thread Main() pid 26321)
[ 3096.841675] amdgpu 0000:03:00.0: in page starting at address 0x000000000174b000 from 27
[ 3096.841676] amdgpu 0000:03:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
[ 3107.008511] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=114395, emitted seq=114397

What GPU and Kernel version do you have?

[andrewpc]

I managed to get some extra logs for the lock up from the dmesg. The screen and keyboard attached to X is dead but the server is responding to SSH logins. Here is the error
Note that I have also update the vulkan and AMDGPU versions which brought along LLVM7.0.1

[ 3096.841674] amdgpu 0000:03:00.0: [gfxhub] VMC page fault (src_id:0 ring:158 vmid:2 pasid:32800, for process Main() pid 26321 thread Main() pid 26321)
[ 3096.841675] amdgpu 0000:03:00.0: in page starting at address 0x000000000174b000 from 27
[ 3096.841676] amdgpu 0000:03:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000
[ 3107.008511] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=114395, emitted seq=114397

What GPU and Kernel version do you have?

was in original post but here you go BTW openSUSE Tumbleweed updated to latest this morning to ensure it wasn't a version issue

Code: Select all

andrew@host:~> uname -a
Linux host 4.20.10-1-default #1 SMP PREEMPT Tue Feb 19 06:34:39 UTC 2019 (08d0345) x86_64 x86_64 x86_64 GNU/Linux

==========
VULKANINFO
==========

Vulkan Instance Version: 1.1.98
Devices         count = 2
                GPU id       : 0 (AMD RADV VEGA10 (LLVM 7.0.1))
                Layer-Device Extensions count = 0
                GPU id       : 1 (AMD RADV VEGA10 (LLVM 7.0.1))
                Layer-Device Extensions count = 0
...

Device Properties and Extensions :
==================================
GPU0
VkPhysicalDeviceProperties:
===========================
        apiVersion     = 0x401046  (1.1.70)
        driverVersion  = 75509764 (0x4803004)
        vendorID       = 0x1002
        deviceID       = 0x687f
        deviceType     = DISCRETE_GPU
        deviceName     = AMD RADV VEGA10 (LLVM 7.0.1)

[Xenon_Slayer]

Mission to nowhere?

I've taken a mission to deploy a satellite. The guidance pointed to an Inactive Jumpgate. A few minutes later, the mission completed on its own.

Save after taking the mission: https://dl.dropbox.com/s/75rbkxbtgcl49h ... 010.xml.gz

Fixed the mission pointing to the inactive Jump Gate. I can't say I had it complete on its own though.

Edit: Got the mission issue now. Looking into it.

[radcapricorn]

I'm getting weird flashes that I assume are related to a battle in progress in front of me. Gif here (composed of screenshots). They persist across reloading the game (even after exiting to desktop), but so far only in that spot (i.e. I've played ahead an haven't had a repeat so far). Huge white flash is even visible when looking the opposite way from that battle.

Save here (Reused the previous link as Xenon_Slayer is already on top of it).

GTX 980 Ti (driver 415.27, Vulkan 1.1.99).

Edit: Got the mission issue now. Looking into it.

Awesome!

[ant1393]

issues linux 2.0 :

- gamepad mouse emulation does not show cursor on map. (can't clicks..)

- sound of laser / weapons is very low / inaudible.

- map filters tabs does not show buttons sometimes.

i precise i have a formatted fresh installed system with only X4... look my config in signature, if you can fix the mouse emulated cursor not showed as fast as you released linux release it would be awesome !

(tested both xbox one pad + steam controller... no gamepad mouse emulated cursor)

actually the game/map is unplayable apart with mouse+keyboard which i don't use...

[Xenon_Slayer]

Edit: Got the mission issue now. Looking into it.

Awesome!

Fixed. Thanks for the save.