Commands with Alternate uses

This forum serves as MSCI Reference at EGOSOFT. It's Read-Only for non MSCI Group members.

Moderators: Scripting / Modding Moderators, MSCI Moderators

Post Reply
mark_a_condren
Posts: 1468
Joined: Wed, 3. Aug 05, 05:05
x3tc

Commands with Alternate uses

Post by mark_a_condren » Sat, 14. May 11, 18:49

A very limited number of commands may have alternate uses, or added functionality, that is not immediately apparent from the commands wording or layout.

If a command has a known alternate usage a brief explanation of the alternate usage may be found here.

This is by NO means an exhaustive list of these commands, but as they become known they may be added here.


------------------------------------------------------------------------------
This command can also be used to retrieve the flight speed of Missiles from their ware entry. Use the command as for a Laser, but in <Var/Ware> insert the required Missile instead.

------------------------------------------------------------------------------

Can also be used to return a factory array from a Complex Hub. <RefObj> being the complex hub, not the sector. If the sector is inserted the array will contain all stations of type 'Factory' from the sector.

n.b. <RetVar> = <RefObj> -> get station array from sector, does not work on complex hubs.

------------------------------------------------------------------------------

User avatar
Juggernaut93
Posts: 2897
Joined: Sun, 17. Jul 11, 21:03
x4

[39]301326

Post by Juggernaut93 » Fri, 18. May 12, 17:58

Un numero molto limitato di comandi può avere usi alternativi, o funzionalità aggiuntive, che non si deducono immediatamente dal nome o dalla struttura del comando.

Se un comando ha un uso alternativo noto, puoi trovare qui una breve spiegazione di tale utilizzo.

Non esiste AFFATTO una lista esaustiva di questi comandi, ma non appena ne saranno noti di nuovi, essi verranno aggiunti qui.


------------------------------------------------------------------------------
Questo comando può essere usato anche per ottenere la velocità di volo dei Missili. Usa il comando come per un Laser, ma in <Var/Ware> invece di un Laser inserisci il Missile richiesto.

------------------------------------------------------------------------------

Questo comando può essere usato anche per restituire un array di fabbriche appartenenti a un complesso. <RefObj> è la Cabina di Comando del complesso, invece del settore. Se viene inserito un settore, l'array conterrà tutte le stazioni di tipo 'Factory' del settore.

n.b. <RetVar> = <RefObj> -> get station array from sector, non funziona con i complessi.
------------------------------------------------------------------------------

Post Reply

Return to “MSCI Reference”