[General Information] The 'X' coordinate system

This forum serves as MSCI Reference at EGOSOFT. It's Read-Only for non MSCI Group members.

Moderators: Scripting / Modding Moderators, MSCI Moderators

Post Reply
mark_a_condren
Posts: 1468
Joined: Wed, 3. Aug 05, 05:05
x3tc

[General Information] The 'X' coordinate system

Post by mark_a_condren » Sat, 2. Oct 10, 20:10

The coordinate system in the X games comprises 3 axes. These consist of X, Y and Z.

These coordinates are displayed in the lower right corner of the sector map. All coordinate locations are displayed in meters from the centre of the system. With X = 0, Y = 0 and Z = 0 being the exact centre of the system.

When first opening the Sector Map, the default view is from above.

When using the coordinate system in the default view, the following would apply

X = West / East
Y = Up/ Down
Z = North / South

Sector View from the Top looking Down
[ external image ]

When using the coordinate system in the Rotated view (default being the ‘insert’ key), the same axes would apply, only the view perspective changes. Consider yourself at the South end of the sector looking North.

Sector View from the Side, South end looking North
[ external image ]

The coordinates for any object or position in the sector can be found using the orientation keys (default keys are num pad arrow keys) or Up / Down arrow keys for quick Station / Ship selection.


*************************************************************

For those who might be confused, there are 2 systems of co-ordinates.

X - Y are a flat plane, with Z being Up/Down from that plane.

X - Z are a flat plane, with Y being Up/Down from that plane.

Egosoft chose to use the latter, although the former is probably more widely understood and accepted.

There is no Why to this. Its just the way it is in the game and cannot be changed.
Last edited by mark_a_condren on Fri, 31. Dec 10, 12:34, edited 1 time in total.

User avatar
X2-Illuminatus
Moderator (Deutsch)
Moderator (Deutsch)
Posts: 24949
Joined: Sun, 2. Apr 06, 16:38
x4

[TiP][49] 288019

Post by X2-Illuminatus » Mon, 9. May 11, 19:55

Das Koordinatensystem in den X-Spielen umfasst drei Achsen. Dies sind die X-, Y- und Z-Achse.

Die Koordinaten werden in der rechten unteren Ecke der Sektorkarte in Metern (m) ausgehend vom Mittelpunkt des Sektors angezeigt. Der genaue Mittelpunkt des Sektors ist X = 0, Y = 0 und Z = 0.

Wenn die Sektorkarte geöffnet wird, ist die Standardansicht von oben.
In der Standardansicht des Koordinatensystem trifft das folgende zu

X = West / Ost
Y = Hoch/ Runter
Z = Nord / Süd

Sekttoransicht von oben nach unten schauend
[ external image ]

Wenn das Koordinatensystem in der rotierten Sicht genutzt wird (standardmäßig umschaltbar über die "Einfg"-Taste), sind die Achsen immer noch die gleichen, nur die Perspektive ändert sich. Stelle dir vor, du würdest dich am südlichen Ende des Sektors nach Norden blickend befinden.

Sektoransicht von der Seite, südliches Ende nach Norden schauend
[ external image ]

Die Koordinaten jedes Objekts oder jeder Position im Sektor können über die Nummernfeldtasten oder über die Pfeiltasten Hoch / Runter, zur schnellen Stations- / Schiffsauswahl, herausgefunden werden.


*************************************************************

Für diejenigen die jetzt verwirrt sind, es gibt zwei Koordinatensysteme.

X - Y ist eine flache Ebene, Z beschreibt die Richtung Hoch/Runter ausgehend von dieser Ebene.

X - Z ist eine flache Ebene, Y beschreibt die Richtung Hoch/Runter ausgehend von dieser Ebene.

Egosoft entschied sich letzteres zu verwenden, obwohl ersteres wahrscheinlich öfter genutzt wird. Es gibt keine Begründung, warum sich Egosoft so entschieden hat. Es ist einfach die Art, wie es im Spiel ist und kann nicht geändert werden.

User avatar
Juggernaut93
Posts: 2897
Joined: Sun, 17. Jul 11, 21:03
x4

[39]288019

Post by Juggernaut93 » Sat, 19. May 12, 13:19

Il sistema di coordinate nei giochi di X comprende 3 assi: X, Y e Z.

Queste coordinate sono mostrate nell'angolo in basso a destra della mappa del settore. Tutte le coordinate sono espresse in metri dal centro del sistema. Dunque X = 0, Y = 0 e Z = 0 sono l'esatto centro del sistema.

Inizialmente, all'apertura della Mappa del Settore, la visuale di default è dall'alto.

Quando si usa il sistema di coordinate nella visuale di default, vale il seguente:

X = Ovest / Est
Y = Su / Giù
Z = Nord / Sud

Vista del settore dall'alto verso il basso:
[ external image ]

Quando si usa il sistema di coordinate con la visuale rotata (il tasto di default è "Insert"), valgono gli stessi assi, solo che la prospettiva cambia. Considerati come se fossi al Sud del settore guardando verso Nord.

La Visuale del Settore dal lato, guardando da Sud verso Nord:
[ external image ]

Le coordinate per ogni oggetto o posizione nel settore possono essere trovate usando i tasti per l'orientazione (i tasti di default sono le frecce del tastierino numerico) o i tasti Su / Giù per selezionare rapidamente una Nave o una Stazione.

*************************************************************

Per coloro che potrebbero essere confusi, ci sono 2 sistemi di coordinate.

X - Y sono un piano, mentre Z rappresenta la direzione Su / Giù rispetto a quel piano.

X - Z sono un piano, mentre Y rappresenta la direzione Su / Giù rispetto a quel piano.

La Egosoft ha scelto di usare quest'ultimo, sebbene il primo sia probabilmente compreso e accettato maggiormente.

Non c'è un motivo preciso. È semplicemente il sistema usato nel gioco e non può essere cambiato.
Last edited by Juggernaut93 on Fri, 1. Jun 12, 15:43, edited 1 time in total.

User avatar
Juggernaut93
Posts: 2897
Joined: Sun, 17. Jul 11, 21:03
x4

Post by Juggernaut93 » Sun, 20. May 12, 22:21

I found that the original screenshots are no longer available, so I uploaded new screens.
Are they OK? If they are, translation is ready and can be sticked to the English topic.

Post Reply

Return to “MSCI Reference”