[SCR] [18.07.2010] HQ-Movement-Service - for X3-TC V1.05
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
[SCR] [18.07.2010] HQ-Movement-Service - for X3-TC V1.05
HQ-Movement-Service
Version: 1.05TC - 18.07.2010
by Rob2222
Changes in 1.04: Better english translations (thx to userene)
Changes in 1.05: Corrected error in English language file
Description:
You always wanted to move your HQ but you didnt knew any company that was able to? This has an end, cause now you have the HQ-Mover-Service company! Cause a really new sub-room-space-compression it is now possible, to move your wares, the credits and your blueprints into a TL ship.
You need a TL-type-transporter with 25.000 units of free cargo space and 2.200.000 credits.
The HQ should not be in a production cycle cause this will not be restored.
HQ deconstruct:
Move close to 5km, target it, and press the key 'HQ-Mover: Load items+HQ into TL'. (Before that, map the key in the keymapper).
A little while later you have 2.200.000 credits less and your HQ, wares, blueprints and HQ-credits are in your TL.
HQ construct:
Build the HQ on the new place like you do it normally.
Move close to 5km, target it, and press the key 'HQ-Mover: Transfer items back to HQ'. (Before that, map the key in the keymapper).
Wares, Blueprints and HQ-credits will now be transferred back to your new HQ.
Important:
Make a Backup of your X3TC Saves (find in %USERPROFILE%\Egosoft\X3TC\Save)
The script should not do harm to your saves, but better be safe and backup anyways.
Installation:
1. Tested with X3-TC V2.7 (should work on older X3-TC, too)
2. You need the Script-Editor activated (Rename your PLAYERNAME (NOT shipname) to Thereshallbewings . Watch the double l (small letters))
3. Unpack the archive in the X3 Terran Confilct folder.
4. In the game go to the controls settings and map keys for the 2 new commands:
'HQ-Mover: Load items+HQ into TL'
and
'HQ-Mover: Transfer items back to HQ'
Uninstallation:
1. Finish all HQ-Movements
2. Run Delete_HQMover.cmd
(or delete the 5 files listed below manually)
Regarding the Script
The script uses File and Page ID 8082.
It only uses hotkeys for maximum compatibility.
Files:
\scripts\plugin.hqmover.load.hq.in.tl.xml
\scripts\plugin.hqmover.load.wares.back.xml
\scripts\setup.plugin.hqmover.xml
\t\8082-L049.xml
\t\8082-L044.xml
Download:
HQ Umzugsservice 1.03TC (ger/eng)
HQ Umzugsservice 1.04TC (ger/eng)
HQ Umzugsservice 1.05TC (ger/eng)
Have fun
Rob2222
Version: 1.05TC - 18.07.2010
by Rob2222
Changes in 1.04: Better english translations (thx to userene)
Changes in 1.05: Corrected error in English language file
Description:
You always wanted to move your HQ but you didnt knew any company that was able to? This has an end, cause now you have the HQ-Mover-Service company! Cause a really new sub-room-space-compression it is now possible, to move your wares, the credits and your blueprints into a TL ship.
You need a TL-type-transporter with 25.000 units of free cargo space and 2.200.000 credits.
The HQ should not be in a production cycle cause this will not be restored.
HQ deconstruct:
Move close to 5km, target it, and press the key 'HQ-Mover: Load items+HQ into TL'. (Before that, map the key in the keymapper).
A little while later you have 2.200.000 credits less and your HQ, wares, blueprints and HQ-credits are in your TL.
HQ construct:
Build the HQ on the new place like you do it normally.
Move close to 5km, target it, and press the key 'HQ-Mover: Transfer items back to HQ'. (Before that, map the key in the keymapper).
Wares, Blueprints and HQ-credits will now be transferred back to your new HQ.
Important:
Make a Backup of your X3TC Saves (find in %USERPROFILE%\Egosoft\X3TC\Save)
The script should not do harm to your saves, but better be safe and backup anyways.
Installation:
1. Tested with X3-TC V2.7 (should work on older X3-TC, too)
2. You need the Script-Editor activated (Rename your PLAYERNAME (NOT shipname) to Thereshallbewings . Watch the double l (small letters))
3. Unpack the archive in the X3 Terran Confilct folder.
4. In the game go to the controls settings and map keys for the 2 new commands:
'HQ-Mover: Load items+HQ into TL'
and
'HQ-Mover: Transfer items back to HQ'
Uninstallation:
1. Finish all HQ-Movements
2. Run Delete_HQMover.cmd
(or delete the 5 files listed below manually)
Regarding the Script
The script uses File and Page ID 8082.
It only uses hotkeys for maximum compatibility.
Files:
\scripts\plugin.hqmover.load.hq.in.tl.xml
\scripts\plugin.hqmover.load.wares.back.xml
\scripts\setup.plugin.hqmover.xml
\t\8082-L049.xml
\t\8082-L044.xml
Download:
HQ Umzugsservice 1.03TC (ger/eng)
HQ Umzugsservice 1.04TC (ger/eng)
HQ Umzugsservice 1.05TC (ger/eng)
Have fun
Rob2222
Last edited by Rob2222 on Sun, 18. Jul 10, 12:49, edited 3 times in total.
- Lord Dakier
- Posts: 3243
- Joined: Fri, 8. Dec 06, 13:45
@Dakier:
Do you have something special in mind?
@All:
My english isnt the best. If someone would take a look at the english language file (its just ca 10 line) and correct it a little (I think I have at least some grammar errors in) and would send me the file, I would be happy to update the package.
BR
Robert
Do you have something special in mind?
@All:
My english isnt the best. If someone would take a look at the english language file (its just ca 10 line) and correct it a little (I think I have at least some grammar errors in) and would send me the file, I would be happy to update the package.
BR
Robert
Rob2222, check your PMs.Rob2222 wrote:@Dakier:
Do you have something special in mind?
@All:
My english isnt the best. If someone would take a look at the english language file (its just ca 10 line) and correct it a little (I think I have at least some grammar errors in) and would send me the file, I would be happy to update the package.
BR
Robert
It's a TURRET, not a "turrent". Learn to spell.
No problemRob2222 wrote:@Userene:
Thank you evry much for the better translations. I updated the package.
BR
Robert
Don't forget to submit this to the Community Library, so it won't get forgotten.
It's a TURRET, not a "turrent". Learn to spell.
-
- Posts: 37
- Joined: Wed, 22. Aug 07, 01:50
Hi. I see a problem with your language file. In the Controls menu, Interface, I see:
ReadText 8082-1901
and
ReadText 8082-1902
I think this happens because your file 8082-L044.xml has:
<language id="49"> instead of <language id="44">
However, I've tried correcting it myself and reinstalling the script with no luck. Maybe I'm missing something else...
ReadText 8082-1901
and
ReadText 8082-1902
I think this happens because your file 8082-L044.xml has:
<language id="49"> instead of <language id="44">
However, I've tried correcting it myself and reinstalling the script with no luck. Maybe I'm missing something else...