[X3LU] Anarkis Defense System - Joubarbian Edition (1.05)
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
Could you download this file and put that into your addon\scripts folder? (overwrite)
Then test again. The reason I'm asking this is that I don't have a vanilla LU installation, only Mayhem.
Then test again. The reason I'm asking this is that I don't have a vanilla LU installation, only Mayhem.
-
- Posts: 8
- Joined: Tue, 30. May 17, 14:22
Forgive me if I'm being stupid...
I bought my first carrier (griffin) in LU but I'm struggling to adapt to it/use the commands properly, so I installed this and the menu is fantastic - a lot of very useful (repair bay...) tools/commands. But I only seem to be able to see Carriers that I am not currently in? So is there no way to be able to use ADS for my own Griffin whilst I am flying it? As the commands seem much more straight forward and simple than using the Carrier Command system in the player console. Not to mention I have to keep changing ships to use the repair bay
I bought my first carrier (griffin) in LU but I'm struggling to adapt to it/use the commands properly, so I installed this and the menu is fantastic - a lot of very useful (repair bay...) tools/commands. But I only seem to be able to see Carriers that I am not currently in? So is there no way to be able to use ADS for my own Griffin whilst I am flying it? As the commands seem much more straight forward and simple than using the Carrier Command system in the player console. Not to mention I have to keep changing ships to use the repair bay
I've got a question for you ADS/Mayhem users. After 37h into Mayhem i now have a frequent desire to target stations with my carrier wings. And their homebase carriers are managed with ADS.
How do you guys usually issue an attack order against stations?
- the automated mode only reacts to ships.
- there is a manual command "clear sector". But that also seem to ignore stations
- carrier command software (attack my target) or manual commands to all docked ships don't work on ADS managed fighters
So the only solution i found was disabling ADS for all docked ships, then issue the manual attack order for all docked ships of the carrier. After the strike a manual ADS retreat order gets them back in the carrier and i can hit ADS "activate all docked ships" again. But i also have to switch the carrier from manual to automated because i used the retreat order beforehand.
All this is a bit tedious. Am i missing something? Is there an easier way with less clicks? If not, maybe an additional manual ADS command like "invade sector" (attacking everything, closest first) or "attack" (a specific ship or station) could help here.
I'm using M7 carriers so it would definitely be worse with TM's.
How do you guys usually issue an attack order against stations?
- the automated mode only reacts to ships.
- there is a manual command "clear sector". But that also seem to ignore stations
- carrier command software (attack my target) or manual commands to all docked ships don't work on ADS managed fighters
So the only solution i found was disabling ADS for all docked ships, then issue the manual attack order for all docked ships of the carrier. After the strike a manual ADS retreat order gets them back in the carrier and i can hit ADS "activate all docked ships" again. But i also have to switch the carrier from manual to automated because i used the retreat order beforehand.
All this is a bit tedious. Am i missing something? Is there an easier way with less clicks? If not, maybe an additional manual ADS command like "invade sector" (attacking everything, closest first) or "attack" (a specific ship or station) could help here.
I'm using M7 carriers so it would definitely be worse with TM's.
-
- Posts: 108
- Joined: Thu, 20. Sep 07, 17:00
Maybe Im dense, but can someone walk me through a defense grid setup?
I added an M6 to my home sector defense grid, defense grid is on (though if I toggle this, it gives me an error that "Reset Mode Activated".....)
The automatic name changing never does anything with the M6 I've added to the grid, and when I spawn a pirate in the system, the M6 does nothing.
Am I missing an "ENABLE" function? I've got the sector set to be monitored in the grid....
The M6 shows "Member" but does nothing.
I added an M6 to my home sector defense grid, defense grid is on (though if I toggle this, it gives me an error that "Reset Mode Activated".....)
The automatic name changing never does anything with the M6 I've added to the grid, and when I spawn a pirate in the system, the M6 does nothing.
Am I missing an "ENABLE" function? I've got the sector set to be monitored in the grid....
The M6 shows "Member" but does nothing.
The first link, Mediafire, seems to be infected with 'Ransomware'.
One person from the Korean community has been reported to have been infected with Ransomware twice, after clicking on the link.
The second link is said to be OK.
Anyone, DO NOT ATTEMPT TO DOWNLOAD FROM THE MEDIAFIRE LINK until safety is confirmed.
Be careful.
One person from the Korean community has been reported to have been infected with Ransomware twice, after clicking on the link.
The second link is said to be OK.
Anyone, DO NOT ATTEMPT TO DOWNLOAD FROM THE MEDIAFIRE LINK until safety is confirmed.
Be careful.
You really think that if I wanted to infect you with a ransomware, I'd only do it on the first link?
Virus total report
Virus total report
NO, NO.
You are misunderstanding.
I think you do not have malicious intent.
As I said, It reported from "ONE Person of Korean community".
NOT ME.
http://cafe.naver.com/x3cafe/41056
Translation:
If this thing hurt your mind, I'm sorry.
But, I think, if this report is true, it could be a Mediafire server issue.
This is not virus or malware! It's ransomware! The server itself may be infected.
I wrote this for you, not for criticizing you.
You are misunderstanding.
I think you do not have malicious intent.
As I said, It reported from "ONE Person of Korean community".
NOT ME.
http://cafe.naver.com/x3cafe/41056
Translation:
Red box (Mediafire) I've been infected with Ransomware twice.
I flew all the data on the hard disk.
When I try to download the Anarkis-Joubarbian Edition (ADS) 1.03 script into that address,
- The popup window opens and Ransomware runs, so I do not know the timing so fast.
- Suddenly the hard disk is busy.
- Files are encrypted.
- Randomware backup is all data backup. Format - recovery
- I think the download on the dropbox is OK ...
Back up your data for risk!
If this thing hurt your mind, I'm sorry.
But, I think, if this report is true, it could be a Mediafire server issue.
This is not virus or malware! It's ransomware! The server itself may be infected.
I wrote this for you, not for criticizing you.