[X3LU] EasyConnect - Complex Connector
Moderators: Moderators for English X Forum, Scripting / Modding Moderators
[X3LU] EasyConnect - Complex Connector
Version 1.1 (Litcube's Universe only)
18/02/2016
Download from Mediafire
So you like Tornado missiles, right ? And you want to build 30 factories able to build them and rock your world ? But seeing that you have to connect 30 factories to 15 complex construction kits manually, you rage quit X3 and go back to play Candy Crush ?
Well, these times are over. With this script, you just have to follow these instructions :
1. Assign a hotkey to EasyConnect.
2. Build one Complex Hub in your current sector. You don't need more than one !
3. Build all your factories around your Hub (25km max).
4. Press the hotkey.
5. Et voilà ! Now all your factories are connected to your Complex Hub. If you want to build another complex, or connect more factories to the previous one, just press the hotkey and don't worry : the script checks for all your factories and auto-connect them to the nearest hub.
----------------------------
Version 1.1 adds compatibility with Mayhem 1.02, in order to avoid connecting sanctuaries with complex hubs.
18/02/2016
Download from Mediafire
So you like Tornado missiles, right ? And you want to build 30 factories able to build them and rock your world ? But seeing that you have to connect 30 factories to 15 complex construction kits manually, you rage quit X3 and go back to play Candy Crush ?
Well, these times are over. With this script, you just have to follow these instructions :
1. Assign a hotkey to EasyConnect.
2. Build one Complex Hub in your current sector. You don't need more than one !
3. Build all your factories around your Hub (25km max).
4. Press the hotkey.
5. Et voilà ! Now all your factories are connected to your Complex Hub. If you want to build another complex, or connect more factories to the previous one, just press the hotkey and don't worry : the script checks for all your factories and auto-connect them to the nearest hub.
----------------------------
Version 1.1 adds compatibility with Mayhem 1.02, in order to avoid connecting sanctuaries with complex hubs.
Last edited by Joubarbe on Mon, 29. May 23, 09:58, edited 5 times in total.
- solarahawk
- Posts: 257
- Joined: Sat, 22. Dec 07, 23:18
Thanks for answer.
Why?
To have Saturn Complex Hubs with the same type of station e.g
Saturn Complex Hubs require to be a self-sustaining complex.
But self-sustaining complex is you know very expensive.
Better have e.g 30 stations the same type on the start in complex, this is whay we build ordinary complex not saturn complex
am I wrong ?
anyway your EasyConnect is useful thank you very much:)
Greg
Why?
To have Saturn Complex Hubs with the same type of station e.g
Saturn Complex Hubs require to be a self-sustaining complex.
But self-sustaining complex is you know very expensive.
Better have e.g 30 stations the same type on the start in complex, this is whay we build ordinary complex not saturn complex
am I wrong ?
anyway your EasyConnect is useful thank you very much:)
Greg
I'm not sure to understand you correctly... So you want to connect your factories to SCH ? There's no point doing that. SCHs build one product from different levels of production capabilities.To have Saturn Complex Hubs with the same type of station e.g
And your example doesn't explain why you would want that. You state at the end that it is better to have 30 stations building the same product, because it's less expensive than SCHs. Yeah, I agree... That's why EasyConnect is for. There are no links between vanilla complexes and SCHs.
Is there any chance of this getting a vanilla port?
It's a very good time-saver.
Manually constructing complex hubs from tons of stations is such a tedious time-consuming job.
In fact. I was wondering if there's a way to simply bypass the 'cutscene' that gets initiated whenever you build/connect stations.
It's a very good time-saver.
Manually constructing complex hubs from tons of stations is such a tedious time-consuming job.
In fact. I was wondering if there's a way to simply bypass the 'cutscene' that gets initiated whenever you build/connect stations.
- X2-Illuminatus
- Moderator (Deutsch)
- Posts: 24965
- Joined: Sun, 2. Apr 06, 16:38
There's no script command, neither for MSCI nor MD, to connect factories in the vanilla game. So unless, the respective hardcoded function is ported from LU - which I doubt is that easy - porting this script won't be possible.MickDick wrote:Is there any chance of this getting a vanilla port?
When you place stations via script, there's no cutscene.MickDick wrote:In fact. I was wondering if there's a way to simply bypass the 'cutscene' that gets initiated whenever you build/connect stations.
Nun verfügbar! X3: Farnham's Legacy - Ein neues Kapitel für einen alten Favoriten
Die komplette X-Roman-Reihe jetzt als Kindle E-Books! (Farnhams Legende, Nopileos, X3: Yoshiko, X3: Hüter der Tore, X3: Wächter der Erde)
Neuauflage der fünf X-Romane als Taschenbuch
The official X-novels Farnham's Legend, Nopileos, X3: Yoshiko as Kindle e-books!
Die komplette X-Roman-Reihe jetzt als Kindle E-Books! (Farnhams Legende, Nopileos, X3: Yoshiko, X3: Hüter der Tore, X3: Wächter der Erde)
Neuauflage der fünf X-Romane als Taschenbuch
The official X-novels Farnham's Legend, Nopileos, X3: Yoshiko as Kindle e-books!
What a shame. In conjunction with Heph's Station building corp mod this would've made complex building completely automated and easy.
Reason I asked about cutscene, having now mentioned hephaistos, was when one would want to be cheap about it, since it costs a bit more using that service per labour costs. Oh well.
Reason I asked about cutscene, having now mentioned hephaistos, was when one would want to be cheap about it, since it costs a bit more using that service per labour costs. Oh well.
-
- Posts: 42
- Joined: Mon, 5. Nov 12, 08:59
I am having a problem with easy connect not working with a fusion beam factory. I have been using it for all manner of set ups, and it has been working flawlessly. However, no matter how close I place this factory, it does not connect.
Of note, It does go through the usual process of connecting (as opposed to the error when trying to connect a factory to far away) but after the 'done' message, there remains the two factories (the main group--has about 15 factories connected) and the fusion beam one.
Any idea what might be causing this?
Of note, It does go through the usual process of connecting (as opposed to the error when trying to connect a factory to far away) but after the 'done' message, there remains the two factories (the main group--has about 15 factories connected) and the fusion beam one.
Any idea what might be causing this?
-
- Posts: 3
- Joined: Thu, 11. May 23, 12:28
Re: [X3LU] EasyConnect - Complex Connector
Anyone got a working link on this?